How does this work please?

[Lecciv]

Just looked at a mates alarm panel that was installed 2 years ago but has been defaulting randomly now and again.

I found that in the FCU
live->brown, neutral->blue.
In the alarm panel
live->blue, neutral->brown.

This likely to of caused the complications with the alarm panel?

 

[DPG]

Not as much as the missing fuse

 

[Cid]

Try swapping the cables around

 

[DPG]

Seriously though, if the mains feeds straight into the internal step-down transformer then it shouldn't make a difference to operation.

 

[telectrix]

they keep having plumbers/kitchen fitters/builders fitting alarms, what do you expect?

 

[telectrix]

when you say defaulting do you mean it'd reverting to factory settings? if so it's probably an optima and the battery is probably seeming pregnant.

 

[ian.]

As above check for battery swelling or shake the battery, if it rattles, get a new one

 

[telectrix]

As above check for battery swelling or shake the battery, if it rattles, get a new one

tried that on the missus. she was not amused.

 

[telectrix]

mods, pleeze xcuz any furueree pists, as the beer and pink floyd are in control.

 

[GMES]

mods, pleeze xcuz any furueree pists, as the beer and pink floyd are in control.

Nothing to see here, move along please.

 

[Squid]

tried that on the missus. she was not amused.

Is she made from latex or rubber also check the fuse on the mains operated pump.........

 

[Spoon]

Is she made from latex or rubber .........

I just bought one of those real like dolls and she's so realistic that she just wants to be friends...

 

[Wilko]

I just bought one of those real like dolls and she's so realistic that she just wants to be friends...

I mustn't have paid enough

 

[Squid]

I just bought one of those real like dolls and she's so realistic that she just wants to be friends...

With benefits, win win.......

 

[Squid]

I just bought one of those real like dolls and she's so realistic that she just wants to be friends...

Have you really.........

 

[Lecciv]

Seriously though, if the mains feeds straight into the internal step-down transformer then it shouldn't make a difference to operation.

OK thank you.

 

[MJPD29]

Is it a scantronics 9651? Common fault in 2015/16 models we've have 9 back so far

 

[MJPD29]

Is it a scantronics 9651? Common fault in 2015/16 models we've have 9 back so far

 

[Lecciv]

Is it a scantronics 9651? Common fault in 2015/16 models we've have 9 back so far

Yes it is a 9651.

 

[KWCFC]

If the panel keeps defaulting itself then that's a knackered panel regardless of the mains connections.

I would make sure they're connected right on your new panel though!

 

[Lecciv]

I would make sure they're connected right on your new panel though!

Apparently it makes no difference

 

[DPG]

Apparently it makes no difference

Not as far as your fault is concerned, but I hope you are going to correct them !!!

 

[MJPD29]

Will be under warranty for 3 years and can be replaced for free if your a registered installer with scantronics. If not I'm afraid warranty was out after a year. Regardless it cannot be repaired and needs replaced

 

[Rpa07]

Putting up a 600x600 for a client today, the flex provided wasn’t wired too well

- glad I didn’t want another joint and wired straight into the driver.
I’m not sure if it would have made any difference but glad I didn’t try to find out!

 

[charlaz angel]

HaHaHaHa.
Love how these simple threads go soo off subject.

 

[bigspark17]

I thought the thread had redirected back to the OP, after a high jacking but then high jacked again!