Hi,
I have recently purchased a new kitchen including applicances (which I am waiting to be delivered). I am looking to sort out my electrics and get the sockets and fuses in the right place.
Is there any reason why I can't plug the fridge/freezer and gas hob to same double socket?
The...
I’ve been looking for the right answer and just can’t seem to find it.
I had an induction hob installed by a certified electrician, and there are no apparent problems so far, however, it is installed on the CU, RCD and upstream with a RCCB with no MCB,
I’m just not 100% sure if it’s the safest...
Anyone know a decent online retailer that actually lists their hobs by recess dimensions (or even lists them at all in some cases?)
Side rant - why do a lot of appliance websites tell you all the information except the bits an installer might actually want to know, like recess dimensions or...
Hi all!
so I a chippy I work with installed a little kitchen, all appliances supplied from howdens - this particular brand is Lamona.
existing 32A ring was extended to pick up a few items (mini extractor, built in microwave, the hob and a countertop twin socket. Circuit tested out fine - a...
Hello, two parts here....please forgive any incorrect terminology used!
I am looking to replace my gas hob with an induction hob (this one: electriQ 52cm Canopy Cooker Hood Kitchen Extractor Fan in Silver - 5 Year Warranty eiQ52CANOPY | Appliances Direct - https://tinyurl.com/1jipb3dj) which...
Hi everyone.
There is something that confuses me so I hope someone could answer.
There is an electrical Hob which is 7.8KW and electrical oven which is lets say manufacture instruction says 13A so somwhere around 2.0KWs.
If you apply diversity on Hob it comes to somwhere around 17A and I know...
I've just spent an hour getting bogged down with the maths trying to work out diversity for 2 cooking appliances on the same circuit (32A MCB) and same isolation switch,
I thought I would give my workings so others can use it as I wonder if some just assume you can still use the 15kW maximum...
We've recently brought a new build house and it's come with an AEG induction hob. We quickly realised there wasn't enough power to heat more than 2 pans at once. Rather pointless given its a 4 ring hob and slightly challenging cooking xmas dinner!
We've had Bellway out and they explained its a...
Good afternoon.
I'm fitting a new kitchen with a new hob and oven. I hope to use just 1 isolation switch for both appliances. Together the wattage size is almost 11kW.
Do I need 10mm cable with a 50A MCB?
Is that right?
Thanks.
I've been asked to install a cooker and electric hob. However I've been told that the cables for the electric hob have come loose.
Any suggestions on where they should be going?
Hi, i was given measurements from the tenant and they happemed to be slighty wrong. Now iv already ran cables and the plasterer has already done his job. Looking at the pictures the tenant sent me, the accessorries seem a little close to the hob. What can be done now? Do you think its ok as it...
Hi everyone,
Just having new kicthen installed and noticed that they wired 2.5mm HR flex off the cooker switch. The 2.5mm HR flex feeds to a dual cooker outlet which will power a 16amp cooker and a 32amp induction hob. The cooker switch is 6mm cable with a 32amp breaker.
Is this okay?
Many...
hello, we have recently brought a new build house and we want to upgrade our gas hob for an induction hob, we have already brought the hob which requires 32AMP and is 7.4KW power
our house layout makes it a little tricky and expensive to rewire a new circuit through (which we should have...
Hi
When we had the electrics installed for our new kitchen (few months back) we were advised by the electrician at the time to just add a standard plug to the wire of the hob extractor fan (once it was installed).
I have finally come to do this, but would like confirmation that it is safe and...
Hi all,
I have a dedicated cooker circuit on a
6mm cable, 32amp mcb running to cooker switch down to connection plate.
I want to install a 1kw ( just under) oven and 6kw hob! Am I ok swapping the connection plate for a dual one and connecting together??
And if so do I run 6mm flex hob to...
Installation of a cooker in a renovated property, electric oven and a separate induction hob. The hob was to be gas - now with the induction hob, can it be fed from the oven radial via a dual wall outlet? The radial from the Consumer unit is 10mm T + E. The local isolation requirement can be met...
I bought a new hob as we are fitting a new kitchen, we got all the other new appliances wired in, but the hob is a bit more complicated, it has 2 live wires then 1 negative and 1 earth, the wire coming out of the socket where it needs wired into where my old cooker was installed only has 1 live...
Just some clarification please.
Max demand for cooking devices.
OSG says 10A + 30% of "connected cooking appliances in excess of 10A + 5A" if a socket is available in the isolator. The oven and hob are two devices. Does the 15A apply to both of them or just the first one?
eg: Oven 4.8 kW Hob...
I have been told by a local spark that one can not run an induction hob on a 4mm T+E.
From my understanding, most induction hobs are 7-8kW and "require" 6-10mm T+E but our housebuilder only put 4mm because they are cheap.
Or maybe I am cheap for not coughing up £500 for a £150 induction hob...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.