low voltage spots

[deanmac]

hi everybody i would like to ask is it ok to have 2 lv spots over the bath and 2 mains spots on the same circuit thanks in advance

 

[Shakey]

depens what you mean the 'same circuit'?

do you mean the upstairs lighting circuit,

or all fed off one lighting point in the bathroom?

 

[deanmac]

One Lighting Point In The Bathroom

 

[wayne]

sorry need further clarification !
"point "is a very general electrical term (sorry in advance shakey)
are you intending to put all lights wired into one ceiling rose?
putting them on the same circuit shouldnt be a problem ,and running them through the switch shouldnt be either
as long as you comply with section 701 you should be fine

 

[deanmac]

hi i have 4 lights in the bathroom on the same circuit the 2 over the bath i want to be low voltage and the other 2 i want to be 240v gu10s is that ok to do that

 

[wayne]

sounds fine to me , i advise that the lv's are ip rated and sheilded ,you dont want to be in the bath if one of the gu10 explode!!!
coincidently im replying on a different thread at the moment with a similar topic

 

[deanmac]

thanks mate