Search the forum,

Discuss "Neutral" as a correct term in the UK Electrical Forum area at ElectriciansForums.net

G

Gardner

Is neutral the correct word to use on a 2 wire TN-C-S supply coming from a single 11kv-240 volt single phase 2 terminal secondary transformer? Or would it technically be called the earthed conductor instead?
 
Look up the definitions in BS7671; Neutral, Live conductor, PEN conductor. I suppose it depends at what point, you are inspecting that conductor?
 
Last edited:
It depends what frame of reference you want to use, in terms of pure scientific definition I don't think it could be called neutral, but as far as electrical installations and bs7671 is concerned it is still the neutral
 
It's at or near earth potential but not used as a protective conductor, and it carries the load current.

If it walks like a neutral and quacks like a neutral...
 
think you made a right duck up of that spelling.
 
don't be daft. where yo going to find a right div on a bank holiday weekend?
 
This thread has veered off course and no longer neutral lol :)

As others have said, in context, it is defined as neutral by the regs. It has no potential and therefore neutral.
 

Reply to "Neutral" as a correct term in the UK Electrical Forum area at ElectriciansForums.net

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top