Something a bit different.
6kWp west facing roof integrated system.
DSC03948.jpgDSC03941.jpgDSC03937.jpg
This used GSE integration on a monopitch roof. Little details a good roofer helps with is things like bird guard in tile openings. This style of tile is notorious for nests if not blocked. The last picture was taken before the roofers had got the Windowlene out.

I was surprised the customer went for it. The array experiences 11% shading loss, has a low pitch at 18 deg, and faces west. Add all this together, and output is predicted at 4120kW/a. Uses an Eltek 4.4HE-T limited to G83/2 on commissioning.

Roof integration added to installation cost. However, from the customers viewpoint it still gave a better return on their money than leaving it in the bank.
 
However, from the customers viewpoint it still gave a better return on their money than leaving it in the bank.

How do you count in the loss of capital.... as it can no longer be used.

In the bank - interest and still have the capital, here you've purchased an asset to give you an ROI. So you can't directly compare like with like, it's more like buying 20 year futures on electricity...

(p.s. one of my clients is an actuary :) )
 
We use the economic model in PVSol

This is a full discounted cash flow assessed over 20 years to calculate returns and payback. This can make our calcs look slightly less attractive. The discount rate is set at 5%. This represents the value or opportunity cost of the capital. It is like saying if you hadn't invested the money in the PV system, but left it in the bank you would have received 5% interest. This cost is included within the calculation.

The payback period is when the total capital cost is amortised by the FIT payments, Export payments and electricity savings taking in to account all the inputs including the discount rate.

Background inflation is set at 2.5% and fuel price inflation at 5.1%. This latter figure is based on DECC's forward projections of 2.6% above background inflation.

Inverter replacement is included as an operating cost at £40.00 a year. Panel degradation is set at a total of 15% over the assessment period.

Electricity savings are calculated from Generation, Property Electricity usage, and a usage profile.

For this particular project the Yield was 7.2% with a payback of 15 years. The Net Present Value of the investment is £2134.00.

We also provide a straight forward return on funds employed in the first year (revenue plus savings minus operating costs divided by capital cost). In this case 8.2%.

We give the following disclaimer:

"The financial analysis is based on standard VDI 6025 'Economic calculation system for capital goods and plants'. This is a dynamic model that produces a Net Present Value based on the inputs using a Discounted Cash flow method.

Please note the analysis does not constitute financial advice as covered by the terms of the Financial Services Act 1986 and is provided for illustrative purposes only. As already stated the performance of Solar PV systems is impossible to predict with certainty due to the variability in the amount of solar radiation (sunlight) from location to location and from year to year. The estimate is based upon the software's calculations and is given as guidance only. It should not be considered as a guarantee of performance or financial return."
 
How do you count in the loss of capital.... as it can no longer be used.

In the bank - interest and still have the capital, here you've purchased an asset to give you an ROI. So you can't directly compare like with like, it's more like buying 20 year futures on electricity...

(p.s. one of my clients is an actuary :) )

Internal rate of return.

take the total 20 year income and savings, minus the initial cost, divide by 20, divide by initial cost = average anuallised IRR % return after the initial capital has been repaid, so is as directly comparable with a bank interest rate as possible (on long term savings / something like an annuity / long term bonds etc)..... but you also get to keep a solar PV system at the end of the 20 years.
 
A couple of our latest, don't have many of the cable bits (I know how disappointed you'll all be :wink:)

Bridgwater (1MW) is a bit older but its probably our most well known, Yorkshire Building Society (199kW) was probably the most difficult to date upto 5 storey's up and on slate on a metal tray roof and Grosvenor Farms (250kW) on fibre cement roof

bridgewater.jpg

Morrisons Bridgwater 1000kW
YBS_Bradford_sml.jpg

YBS Bradford 199kW
grosvenor.jpg

Grosvenor Farm 250kW
 
Last edited:
I drive past the YBS most days and have to say how good it looks, I thought to myself how hard that must have been to install and on to slate!
 
Some nice jobs there !

Thanks gents, some significant pain aswell!

As we only really do commercial we don't often come across slate, let alone 5 storeys up, if I tell you I was expecting to get 5kW/gang per day and actually got 2.5kW/gang/day I'm sure you'll understand what I mean :willy_nilly:

One thing I would say though was we used 'Genius roof solutions solar flash' which was great and saved an awful lot of time and produced a really neat job.
 

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Green 2 Go Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses Heating 2 Go
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

Advert

Daily, weekly or monthly email

Thread starter

SolarCity

Arms
-
Joined

Thread Information

Title
EF members' installs - show us your work!
Prefix
N/A
Forum
Solar PV Forum | Solar Panels Forum
Start date
Last reply date
Replies
87

Advert

Thread statistics

Created
SolarCity,
Last reply from
whlphil,
Replies
87
Views
24,378

Advert

Back
Top