T
tonywevans
Hi,
I hope someone can help with this problem. I have been trying to locate and fix a fault in a domestic installation. All of the circuits were dead when I arrived. When I checked the fusebox none of the circuits were identified. When I removed the fuse for what should be the final ring the lights and cooker circuits were energised. When I checked the 30amp fuse for what should be the final ring I found 4 conductors wired in. I tested for end to end ring continuity for each combination of these conductors without success. The previous owner of the house was well known as an enthusiastic DIYer.
Would appreciate any advice on how I should proceed further.
I hope someone can help with this problem. I have been trying to locate and fix a fault in a domestic installation. All of the circuits were dead when I arrived. When I checked the fusebox none of the circuits were identified. When I removed the fuse for what should be the final ring the lights and cooker circuits were energised. When I checked the 30amp fuse for what should be the final ring I found 4 conductors wired in. I tested for end to end ring continuity for each combination of these conductors without success. The previous owner of the house was well known as an enthusiastic DIYer.
Would appreciate any advice on how I should proceed further.