17th edition electrician signing off work

[sparky_1989]

Hi im new to this forum and was wondering how i go about signing off work such as re-wires and consumer unit changes. I'm a 17th edition electrician with my time just out a year ago what steps do i have to take because i want to work for myself as i have been offered alot of work where it requires me to sign it off. thanks

 

[telectrix]

you will need to join a scam. elecsa are the favorite.

 

[sparky_1989]

Thanks for the reply so fast I should have added that i live in Scotland so i need to join elesca or a other do i have to sit any tests such as part p

 

[telectrix]

no part p in scotland. different rules rhere. oldtimer or mogga will be better placed to advise.

 

[jedisparks]

When you apply to one of the Part P scheme providers they will set out what you need to do. They will be looking for up to date qualifications, public liability insurance and they will of course ask you for money!

Try googling a couple, Napit, Elesca, NICEIC. They will most likely have the info you need on their site.

Best of luck.

EDITED

forget what Ive just said. the post above is right:smiley2:

 

[SirKit Breaker]

As tel says. I am not familiar with the rules in Scotland either. Irrespective of the work you do, it must all be Inspected, Tested and, Certified as compliant in accordance with the wiring regs anyway. So you should be signing your own work off, whether it is a new installation or an addition to an existing one, these require either a Minor works certificate, or an Electrical Installation certificate, depending on the type of work. I am fairly sure that this will apply in Scotland.

Cheers..........Howard

 

[telectrix]

as howard ^^^^ said, the same rules as regards certification apply in scotland, but forget part p. the organisation in scotland is select, but i'm not sure if scottish building control require you to be a member.

 

[Sparkii]

No scheme's needed, all they want is copy of grade card and calibration cert with eic (depending on area). I'm not sure if they accept it unless your an approved electrician though. Best bet is speak to the building control officer as they all have their own rules/backhanders...

 

[GLENNSPARK]

Hi im new to this forum and was wondering how i go about signing off work such as re-wires and consumer unit changes. I'm a 17th edition electrician with my time just out a year ago what steps do i have to take because i want to work for myself as i have been offered alot of work where it requires me to sign it off. thanks

f**k off ......your a 5 week wunda who thought he made it `caus he got an on line guess right.....get out!!....

 

[Knobhead]

And people call me short tempered!

Nice one Glenn

 

[sedgy34]

Telectrix
Don't you mean join a scab
Cause that's what they all are money grabbing ----as
They use all health and safety words and pretend to be concerned about well being and safety cause the mo ey rolls in from that through us lot

 

[Smudge]

no part p in scotland. SELECT is one of the big schemes here. You need to be registered with them (or similar) to sign off any work that has a building warrant i think.
The same as down south as far as i'm aware with regards to minor works certs and the likes.

Like Telectrix said, mogga or old timer will probably correct me.

I would seriously consider sticking with your company for now until you have more experience, although doing your research just now, like you are, wont do any harm.

 

[ezzzekiel]

**** off

Isnt this type of language not allowed in open forums?

 

[timbobelfast]

" **** off ......your a 5 week wunda who thought he made it `caus he got an on line guess right.....get out!!...."

Nice way to welcome someone to an open forum there glenn!

 

[Sparkystu79]

Need to be either NIC EIC or SELECT registered to carry out works which require a building warrant (new builds, extensions etc). Also need to be a Scottish Building Standards approved certifier of construction. Any other works there's not a requirement to be a member of anything.

 

[Knobhead]

Nice way to welcome someone to an open forum there glenn!

Seems reasonable to me.

You all moan about Electrical Trainee’s, when someone has the guts to say what they think your up in arms.

 

[Heisenberg]

Seems reasonable to me.
You all moan about Electrical Trainee’s, when someone has the guts to say what they think your up in arms.

I suppose the question that comes to mind, is what made Glenn believe the OP was a Electrical Trainee? I can see nothing in the original post that brings me to that conclusion.

But regardless of that fact, it has been stated many, many times over that this forum is not just for time served guys/gals. Not one of us has the right to tell any other member to 'go forth and multiple'.

If you don't agree with someone or don't like them, simply ignore them, how hard is that :crazy:

 

[sparky_1989]

Thanks for all the replys i did a bit more research on it i think i found what i was looking for and Glenn your the one who can f*** off you don't know what your talking about im no 5 week wonder i actually completed a full apprenticeship so stop trying to act the big man on a internet forum.

 

[Knobhead]

Pity there isn’t a dislike button!

 

[sedgy34]

Calm down ladies

 

[mickys86]

I'm gonna be the first to say that for glen, that was very out of character

 

[Guest111]

I'm gonna be the first to say that for glen, that was very out of character

Yeah gotta agree there, sometimes he can be a bit prickly but thats a first,he,s normally quite friendly,I,ve never fell out with him.Maybe he has problems outside the forum,either way I hope it,s nothing major,always very helpfull normally.