- Reaction score
- 233
Someone posted a thread about showing pictures of boards the other day. Here is one I saw today. Brand new install by an electrician apparently with 20+ years experience
- Thread starter casperLennon
- Start date
Currently reading:
Pictures of Board work
Discuss Pictures of Board work in the UK Electrical Forum area at ElectriciansForums.net
Food for thought
Copy what you may see in panel wiring
Maybe on the next one alter how you have the neutral and cpcs rising
If they were dressed into the side edges of the board, and turned 90 deg a little below the connection bars (both at the same level) the conductors could be brought out and risen at whatever position,all straight and at 90s, nice and neat
perhaps the tails could have been left a little longer,going higher before dropping down straight over the connections
Bind together the incoming cables after stripping so that they are all uniform
Copy what you may see in panel wiring
Maybe on the next one alter how you have the neutral and cpcs rising
If they were dressed into the side edges of the board, and turned 90 deg a little below the connection bars (both at the same level) the conductors could be brought out and risen at whatever position,all straight and at 90s, nice and neat
perhaps the tails could have been left a little longer,going higher before dropping down straight over the connections
Bind together the incoming cables after stripping so that they are all uniform
- Reaction score
- 8,227
Some good advice there, thanks chaps 
Reply to Pictures of Board work in the UK Electrical Forum area at ElectriciansForums.net
Similar Threads
- Question
- Question
- Question
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.