Does a 20amp emergency stop button exist? | Page 3 | on ElectriciansForums

Discuss Does a 20amp emergency stop button exist? in the UK Electrical Forum area at ElectriciansForums.net

Joined
Jul 12, 2022
Messages
8
Reaction score
4
Location
London
I’ve been asked to provide an emergency stop button for a circuit rated at 20amps. I’ve never installed one before and only really found 10amp buttons at my local wholesaler. I can put a contactor in, no problem but was just interested to see if you can get them?
 
But it seems to be OK for someone else to then give misinformation and say that a mcb is fine for isolation when it clearly isn't without knowing the circuit.
Isn't it equally misinformation to say that an MCB isn't fine for isolation without knowing the circumstances?!
In my world it doesn't seem totally ridiculous to suggest that
a) you might turn a circuit off before you work on it
b) you might not expect there to be two supplies
c) it would be better if you only had to turn one circuit off.

That's the point, surely?! We both know and understand that MCB's are often single pole, and the principles of isolation. I think that labouring this only distracts from the point I was trying to make.
Granted, if we just threw the double pole main switch my point become irrelevant but in the real world circuits often get worked on with other circuits live.
 
Isn't it equally misinformation to say that an MCB isn't fine for isolation without knowing the circumstances?!
In my world it doesn't seem totally ridiculous to suggest that
a) you might turn a circuit off before you work on it
b) you might not expect there to be two supplies
c) it would be better if you only had to turn one circuit off.

That's the point, surely?! We both know and understand that MCB's are often single pole, and the principles of isolation. I think that labouring this only distracts from the point I was trying to make.
Granted, if we just threw the double pole main switch my point become irrelevant but in the real world circuits often get worked on with other circuits live.

Tim
I agree and am not having a go at you, but some seem to have had a go at me for simply passing on information that an op has asked for without asking the right questions and then being accused of not having the knowledge of being able to give the correct answer even to the point where it could kill people.

Yes, in hindsight maybe I should have asked the relevant questions then this thread wouldn't have been so long but there again ?.

I hope someone doesn't ask a question along the lines of "I need to change a bulb, but it screws in and I don't know what type it is"

Then you ponder in whether to reply e27 or do a full risk assessment of how high or what type of steps they have etc before answering their question or just not bother at all
 
Last edited:
I hope someone doesn't ask a question along the lines of "I need to change a bulb, but it screws in and I don't know what type it is"

Then you ponder in whether to reply e27 or do a full risk assessment of how high or what type of steps they have etc before answering their question or just not bother at all

That is very funny. I've been laughing all day.
I thank God I wore my corset for fear my sides may split!
 
That is very funny. I've been laughing all day.
I thank God I wore my corset for fear my sides may split!

There are risks in wearing a corset/waist trainer, you would be well advised on having a good read up as you could do some serious harm or maybe even kill people, it could be that you drive a coach for instance in-between jobs (of course we don't know that because we haven't all the information to hand) but flaking out at the wheel because of your corset being tight could result in catastrophic consequences.

What happens if your corset is too tight?


Women/Spoon were often laced, so tightly their breathing was restricted, leading to faintness. Compressing the abdominal organs could cause poor digestion, and over time the back muscles could atrophy. In fact, long term tight lacing led to the rib cage becoming deformed.
 
I’ve been asked to provide an emergency stop button for a circuit rated at 20amps. I’ve never installed one before and only really found 10amp buttons at my local wholesaler. I can put a contactor in, no problem but was just interested to see if you can get them?
Whatever it is you are trying to isolate in an emergency the 20A spec is a minimum. Anything above that should do.
 

Reply to Does a 20amp emergency stop button exist? in the UK Electrical Forum area at ElectriciansForums.net

Similar Threads

Fitted a lot of this sort of light recently, with all tests reporting back through central Dali controller(s).
Replies
15
Views
688
nicebutdim
N
If it's going to be an emergency stop and not just a stop, then other factors come into play depending on what sort of machines the emergency stop...
Replies
11
Views
785
  • Question
This contactor you suggested unfortunately only has two NO switches rather than 1 NC and 1 NO required for the CR3 current sensing bypass...
Replies
14
Views
1K
Some year back there was a case of a young girl killed by being sucked down to the bottom of a pool when being emptied through the power drain...
Replies
23
Views
925
  • Question
With what looks like only 5 circuits you can probably put a little 5 way garage consumer unit in there if money is tight
Replies
17
Views
2K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock    No Thanks