J
JaiS
Hi guys,
I am new to the forum and having some issues with some very old wiring while rewiring the house.
Here is the problem...
We have just upgraded. My consumer unit from a very old wylex unıt with the old fuse wıre as the lights went off randomly and was advised by many electricians to upgrade unıt so it meets new regs.
We have noticed theres no PME at all from maın feed into the house and have wıred all up to correct fuses but still no lights, checked all terminal boxes under floorboard and all wıres still connected
Also the cooker everytime I try and switch oven or hob on this also trips the whole consumer unıt out any help?
Electrıcian has been in and cannot figure out what the problem is
Also wen trying to rewıre a new lighting circuit we came into a lot of old 1977 wiring which runs throughout the house but to nothing. Yet it still connected to the current ones so cannot figure out were they're coming from!
Electrıcıan has spent nearly 4 hours with an electro reader and cannot locate as they go to the ring maın and he said this ıs dangerous as it means I have a freeflow live any ideas??
Any help would be greatly appreciated as there must be a solution to this.
Thanks
Jai
I am new to the forum and having some issues with some very old wiring while rewiring the house.
Here is the problem...
We have just upgraded. My consumer unit from a very old wylex unıt with the old fuse wıre as the lights went off randomly and was advised by many electricians to upgrade unıt so it meets new regs.
We have noticed theres no PME at all from maın feed into the house and have wıred all up to correct fuses but still no lights, checked all terminal boxes under floorboard and all wıres still connected
Also the cooker everytime I try and switch oven or hob on this also trips the whole consumer unıt out any help?
Electrıcian has been in and cannot figure out what the problem is
Also wen trying to rewıre a new lighting circuit we came into a lot of old 1977 wiring which runs throughout the house but to nothing. Yet it still connected to the current ones so cannot figure out were they're coming from!
Electrıcıan has spent nearly 4 hours with an electro reader and cannot locate as they go to the ring maın and he said this ıs dangerous as it means I have a freeflow live any ideas??
Any help would be greatly appreciated as there must be a solution to this.
Thanks
Jai