Joining 10mm to 2.5mm T+E

[sythai]

Another joining cable thread.....

Just curious how you chaps would have done this ?

10mm ---> 2.5mm T+E, adaptable box will be permanently accessible after (re-using old shower supply)

Sy:smug2:

 

[telectrix]

din rail terminal blocks in your adaptable box. hope you;re fusing down at the feed of the 10mm to 16A or 20A.

 

[Des 56]

Or alternatively,a fused spur where the reduction takes place

 

[sythai]

din rail terminal blocks in your adaptable box. hope you;re fusing down at the feed of the 10mm to 16A or 20A.

Oh yes nice 20A rcbo

 

[sythai]

Or alternatively,a fused spur where the reduction takes place

Reckon that may be a bit of a squeeze..... ? (Got to loop onto another spur)

 

[Geordie Spark]

Reckon that may be a bit of a squeeze..... ?

Just chop a few strands off the 10mm ........ it'll be fine !!

 

[Guest123]

You want one of the Newlec adapatable boxes that come with the rail mlountable connectors. The connection itself is 2 seperate terminals meaning you could join any size cable to any other size as each one has a seperate terminal.

 

[sythai]

You want one of the Newlec adapatable boxes that come with the rail mlountable connectors. The connection itself is 2 seperate terminals meaning you could join any size cable to any other size as each one has a seperate terminal.

Like that, all ready made simples...... do you know if they come in various sizes ?

 

[Guest123]

Like that, all ready made simples...... do you know if they come in various sizes ?

http://www.neweysonline.co.uk/newle...65-98mm/1000016009/ProductInformation.raction

 

[sythai]

Buy Newlec Moulded Junction Box, Terminal Block, Grey, Five Pole, IP65, 98mm - NL9045

Couple of them for my 'randoms box' in back of van when passing Newey's next week:auto: