MK dual RCD busbar help

[voltage]

Hi all

carrying on from my thread last night on testing continuity of radial circuits.
I've got my MK dual RCD consumer unit and just need some reassurance to see if im correct or not.

ok i've got a picture for you guys to look at

ImageShack® - Online Photo and Video Hosting

so on the picture i connect the busbar into the RDC then cut it off where i have place the spare way cover strip after the 6th prong then repeat the process for the second RCD leaving enough prongs for another 5 MCBs as its a 10 way board is this correct.
many thanks volt

 

[lifrquni]

could always get a plumber to cut it. they're good at cutting copper in the wrong place.

lol true...

 

[chopper76]

There's no live link from the base of the main switch to the top of the second rcd,

 

[chopper76]

Lifrq, I'm guessing the cu you have is a Crabtree star breaker, it appears to hav one busbar but is actually internally split

 

[chopper76]

In your own house as u mentioned

 

[Glen Window]

if ur asking this question you shouldnt be doing it.

 

[lifrquni]

if ur asking this question you shouldnt be doing it.

i only asked this as dual split ccu are fairly new and considered safer when i have been dealing with the older kind having no dual/split option. But ive done it now so thanks for the positive feedback from the few helpful people on here.

 

[chopper76]

What have you been fitting for the last 5 years?

 

[lifrquni]

What have you been fitting for the last 5 years?

mainly been inspecting/testing fault finding etc...

 

[TaffyDuck]

mainly been inspecting/testing fault finding etc...

Now we are both confused.

 

[chopper76]

So you see the inside of a consumer unit more than the usual spark then?

 

[N6rul]

lol

Lol!! Say no more.

 

[DHES]

FFS
I would hate to see the reports you come out with. I would have thought there is more fact in a Harry potter book