Discuss Annex supply, (wont give meter) , demand problems in the UK Electrical Forum area at ElectriciansForums.net

Just re read.
you say “the lad who is doing the job“ and he has already fitted an abundance of load.

An assessment of supply and=load should have been done prior to start. Unless the son who is very good at this sort of thing did it, then he probably has egg on his face and needs to prove he is right even if he isn’t.

so you are not doing this electrical installation.

what is your role in the build


i started it , the daughter had covid so I had to isolate, mate took it over. the owner had no issue getting the supply in but expected me to know it wasn't a house just an annex off the existing property, he would have to go back to planing to get a separate dwelling with a postal address to be able to get a meter, I'm with him a bit on it but I didn't know, I've looked at the DNO quote and it stated its a annex and not a house so I assume ill be able to complain to them a bit, but I've also rang around for him and most of them said it needs its own address, I have however found one that said it can be done no problem but they are not doing it though covid on the big six are able .
 

Reply to Annex supply, (wont give meter) , demand problems in the UK Electrical Forum area at ElectriciansForums.net

Similar Threads

Hi, need more advise as getting two different views from electricians. Ty Detached double garage 10m from house, split equally into garden room...
Replies
3
Views
214
Hi all, So my factory needs more power, currently 100A/3p (70KVA) => 400A/3p (200KVA) UKPN wont upgrade existing supply and are insisting on new...
Replies
1
Views
405
Morning all, Really hoping to get some advice / confirm what a few of us are thinking about a job in the future. Back ground - We have to swap...
Replies
15
Views
479
I'm converting my old garage into a two bedroom annex. At its nearest point it is approx 10m from main house. I plan it to be all electric, UFH...
Replies
5
Views
3K
3 Phase Smart Meter EDMI ES -30 B Install I have a question regarding the potential replacement of my existing EON supplied ELSTER A1140 3...
Replies
9
Views
1K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock