Good Old Delroy, he gets all the best Jobs :)

[Dustydazzler]

 

[Mikegh]

Watched up to about 5 minutes

Not great that he earthed the socket but ignored the rest of the circuit, if that's the way he left it

 

[Petej999]

Watched up to about 5 minutes

Not great that he earthed the socket but ignored the rest of the circuit, if that's the way he left it

Doesn't instill much in the way of confidence.

 

[Mikegh]

He does a lot of checking earths with a voltage tester

 

[MJPD29]

From his videos I honestly think his work is fairly poor. The way he leaves some jobs leave a lot to be desired.

 

[7029 dave]

Trying to adapt a full conduit system will never be a great outcome, Del can only do his best with it.
Add ons with T&E is trouble, those boxes should be bushed to the conduit impossible to do with slip tube.

 

[Dustydazzler]

Lets not forget not every job has a massive budget to make significant changes , some jobs the customer only wants to lay out the bare minimum money possible

Del does of lot of HMOs and Rentals which again landlords only prepared to pay for what work is 'absolutely necessary'

 

[richy3333]

Stopped watching him and CJR. I don’t think showing bad and or dangerous practice to the public enhances our trade at all.

 

[Dustydazzler]

Delroy do you only do work in old council flats ?

 

[Electrics]

Stopped watching him and CJR. I don’t think showing bad and or dangerous practice to the public enhances our trade at all.

I never see CJR doing anything dangerous. I actually asked on here once for people to point me to his 'dangerous' or 'crap' work and nobody could (aside from that SWA he did..)

From what i've seen he does good work.

Delroy on the other hand, i think he's fairly poor. Anyone who glues trunking onto new expensive tiles and then no-nails' on a shaver socket next to a sink instead of simply cutting out a full tile and then putting it back and using plugs to fix the box........just no.

 

[richy3333]

The obvious one that springs to mind was him taking down a wall and then jointing cables in a wago box and ----ing it up into the ceiling and calling it MF. The materials and method he used did not constitute a MF junction box. I politely noted it on his comments and he removed the comment ?

 

[Zerax]

The obvious one that springs to mind was him taking down a wall and then jointing cables in a wago box and ----ing it up into the ceiling and calling it MF. The materials and method he used did not constitute a MF junction box. I politely noted it on his comments and he removed the comment ?

I think his son does all the techie IT stuff on Youtube for him... so he may not have even seen the comment ? It was deleted for him ??

 

[Electrics]

The obvious one that springs to mind was him taking down a wall and then jointing cables in a wago box and ----ing it up into the ceiling and calling it MF. The materials and method he used did not constitute a MF junction box. I politely noted it on his comments and he removed the comment ?

MF?

 

[7029 dave]

MF?

Maintenance Free

 

[Electrics]

Maintenance Free

FFS i knew that but it had escaped me. Cheers Lol.

 

[Dustydazzler]

I always thought MF stood for ManuFactured

 

[DPG]

I remember the one where he was sorting some dodgy sockets under kitchen cupboards. He routed the cables around the cupboards and up the wall completely out of any prescribed zones and called it a good job.

 

[Dustydazzler]

I remember the one where he was sorting some dodgy sockets under kitchen cupboards. He routed the cables around the cupboards and up the wall completely out of any prescribed zones and called it a good job.

This one I believe

 

[Dustydazzler]

Still luv Delroy thou , best celebrity sparks by a mile

 

[DPG]

This one I believe

You found that quick!