Memera 2000 board

[dokkan1080]

Memera 2000 board

Hey has anyone got any idea if and what rcbo will fit into this board?

 

[pc1966]

This might provide an answer:

Memera 2000 RCBO definitive answer

Hi I have seen a couple of posts on this subject but they go back a bit and dont appear to have a definitive answer. I have a MEM Memera 2000 CU, where I need to provide RCBO protection to the lighting circuit to cover some additions I have made in the bathroom. There is already a Eaton 16A...

www.electriciansforums.net

 

[dokkan1080]

Still none the wiser was a late night

 

[ChrisElectrical88]

You can fit the MEM RCBO pods onto the MEM Shield 2 MCBs.

however if I remember rightly if the MCB is labelled up Memera the RCBO pod will not fit and it doesn’t have the clippy bits on it.
[automerge]1590836545[/automerge]
If you have to add RCD protection to more than 2 circuits though, it’s probably cheaper to change the board. There £70+ per pod

 

[Gavin John Hyde]

Why not just route the outgoing cables from the mcb/cu via a small metal enclosure with an rcd in? I often do this

 

[Midwest]

Eaton manufacturer compatible mcb, and a ‘rcd field kit‘ for the Memora 2000. Fitted a couple myself, but the field Kit is about £115.

They are also quite bulky and can be a tight fit, if the CU is packed with cables.

 

[Dustydazzler]

Just change the board for a new rcbo board ?