Discuss Replace light switch for smart Wi-Fi switch in the DIY Electrical Advice area at ElectriciansForums.net
Share this page
- Reaction score
- 25,472
Two blues are neutral, the two COM browns are live wire and 1 WAY is L1.
- Reaction score
- 17,018
Spot on, Westy. You have been paying attention. 
Hopefully there’s enough space in the back box. Some smart switches are quite deep and need more than 25mm box.
Hopefully there’s enough space in the back box. Some smart switches are quite deep and need more than 25mm box.
- Reaction score
- 881
I make it 3 blues.
- Reaction score
- 25,472
Doh, not sure why I'm only saw two.
Reply to Replace light switch for smart Wi-Fi switch in the DIY Electrical Advice area at ElectriciansForums.net
Share this page
Similar Threads
Hi,
I’m looking to install 3 meross smart switches for 3 lights:
entrance switch: only 1 gang but 3 way switch
bedroom switch: 2 gang (1 is 1...
Hi, I have a 220v House I want to change this switch to smart switch, but I am stumped, I don't have a neutral so I had to return the switch I...
WIRING FOR WALL SMART SWITCH FOR CEILING FAN/LIGHT
Just bought a smart wall switch for a ceiling fan/light currently connected to a single switch...
- littletwinn
- DIY Electrical Advice
I have a bathroom fan with a moisture detector that turns it on and off. It also has a control circuit to turn it on/off when moisture is not...
Hi
I want to add a light to my attic.
There is a single switch on the landing that I want to change to a double switch and then use it to still...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
-
Is it possible to put a 16mm swa on a 40a mcb protected by an rcd- Latest: phenolic_labels
-
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.