Hi,
Following on from a post I made about a replacing a triangle undercupboard light, I found one - and wanted to check it is the right connection:
LED Wedge Downlights | Clas Ohlson
and the install PDF:
http://images.clasohlson.com/medias/sys_master/9264267853854.pdf
My existing wire...
Hi,
I have a new build property and one of my kitchen lights has gone.
Images:
http://s15.postimg.org/thvlj1pbv/IMG_20150513_120408_1.jpg
and
http://s10.postimg.org/63b0w1a1l/IMG_20150513_120452.jpg
What is it, where do I buy, part number if known, etc....
Thanks :)
Alex
OK - thank you both.
I am considering the following unit:
24hr Fused Spur Timer by Timeguard
It has the spec:
Specification
- Timer Mode : 24Hr
- Setting Type : Digital
- Voltage Free Contacts : Single Pole ON/OFF
- Operating Voltage : 230V AC
- Switch Rating 230V AC : 13 amp Resistive...
Hi,
I am continuing a post from previous with a new question.
I have a 3kW immersion heater that I would like to change from a (broken) central timer to a local timer. The switch is shown in the image below, circled red.
I have two options:
1. Use a TimeGuard Master Fused Spur, as below...
Hi Oldtimer,
Yes - you are correct. 2 heaters, top and bottom.
The Horstmann product is £66 - quite expensive.
I have just found a cheaper product:
http://www.amazon.co.uk/Smiths-Time-Guard-TS800-Timer/dp/B0036OXD0G/ref=cm_cr_pr_product_top
Would it be possible to convert the red circled...
Hi,
I have a spur leading to a 3kW immersion heater as shown in the image below (circled in red).
I would like to change this to a timer - so I can take advantage of economy 7.
Can anyone recommend a good timer to fit? All I need is 2 hours per day, off peak.
Thanks,Alex
Hi,
I am upgrading a NOBO RF heating system I have.
As part of the upgrade, I have to replace a reciever unit that controls my water immersion heater.
My existing installation is here:
https://sites.google.com/site/imagesforwebanc/_/rsrc/1330335154960/home/DSC00649_c.JPG
The water heater...
Thanks again. I reckon I will do a basic electrical course to learn this stuff.
To replace the element, would a standard element from say B&Q fit inside the radiator, and be OK? (it is a "Tradeko" Type EL. 05Y.1. It is rated at 230V and IP44).
Thanks for your help.
The element is a "Tradeko" Type EL. 05Y.1. It is rated at 230V and IP44.
Other than the 230V, the rest doesn't mean much to me.
- To replace the element, would a standard element from say B&Q fit inside the radiator, and be OK?
- The fused spur I have between the...
Hi,
I have a NOBO electric central heating system. I have 300W towel rails in my bathroom. I didn't get a manual when I bought the flat, so have a few questions if OK:
- Do I need to service electric towel radiators? Do I need to bleed them - as I have heard they are water filled???
- If I...
Thanks for your help - so no annual contract needed
One final question: do these cylinders need to be cleaned out / descaled - like every 10-20 years??
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.