Recent content by digger123

Search the forum,
  1. D

    UFH Heatmiser to Grant Vortex combi help

    It would hardly be as simple as taking a link from 5 to 2 in the burner plug would it ?
  2. D

    UFH Heatmiser to Grant Vortex combi help

    Hi I have a heatmiser uh4 wiring centre and a grant vortex combi condensing oil boiler, doing the heat and HW in a small cottage, the room stats, pump and actuators are ok, but I need a bit of help with the connections to the boiler please, the connections at the burner plug are – 1 - sw live CH...
  3. D

    Adding sockets to a radial circuit in different directions

    Maybe not expect it to be certified at all, I know of at least 4 house sales in NI in this last few months of which 3 were completed with no regard to the state of the electrics, 1 at over £200000 and 2 x in the region of £350000 all 3 houses were over 30 years old. In ROI or mainland UK...
  4. D

    No reply to my previous question

    Hi James, yea sure I looked at the instructions I also got in touch with Kubler technical via messenger but I still have a timer that's doing nowt. I was hoping a member of the forum had used one of these timers before and could offer help. I posted a link to the instructions in the original...
  5. D

    No reply to my previous question

    A 4 Pole 30 ma RCD, supplying a 4 pin socket, the circuit has no neutral, RCD tests fine phase to earth and works as should apart from the functional test button not working due to no neutral or resistor. Thoughts on a link from earth terminal to neutral incoming terminal to enable the...
  6. D

    Reordering the DB’s on software

    I'm not sure why the pictures not opening, I can see it on my post, the 3 dots should be easy enough to find, top LHS corner of circuit detail page.
  7. orgainse db.jpg

    orgainse db.jpg

  8. D

    Reordering the DB’s on software

    On the circuit details page there should be 3 dots in the top LHS (beside the + , - ) click the 3 dots and organise Boards in the second option.
  9. orgainse db.jpg

    orgainse db.jpg

  10. D

    Kubler Codix 6.134 question

    Hi anyone help me out with the connections for this counter? I am intending to use it to count the hours on a heating burner in a mates house. There is a diagram in the link below AC type. https://docs.rs-online.com/7349/0900766b8147ad9e.pdf Just a bit of history, I have a crouzet cp2 counter...
  11. D

    Best website for Makita tools??

    I would vouch for Makita gear any time, bought a DHR242 about 5 year ago great tool to add to the existing cordless drills which are 8 to 9 year old now and going strong, wee cordless grinder Makita DGA452Z 18 V is one of the handiest tools I have (probably the most dangerous also to be fair)...
  12. D

    Scrap SWA cables

    Should get round 80 p to £1 a kg depending how close to the docks you take it for unstripped swa best to grind off any steel boxes ect.
  13. D

    Adding a Light to a light switch

    I trust you will as depending on what sort of light you are hoping to install the cpc will need to be proved.
  14. D

    Adding a Light to a light switch

    It possibly is a t&e supply in with two t&e switch wires out to two separate lights which have been disconnected. This could be checked with a volt meter if you have 230 between the connected live and the black in the connector.

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top