Hi all doing a high end new build and client has solar and battery storage going in (done by others for mcs grant ) I was talking to plumber about diverting any excess power to a second heating element on tank or thought the ftc controls is this possible
Hi everyone I have my nic assessment on the 27th of this month its been a few years since we have had one due to covid and being to busy and our location any tips on what criteria they will be after
I have a commercial ev job to show
A domestic rewire what includes a eV
And possibly a...
I would crack on and move it you probably have more experience than the guys who fitted it as long as do a cert for the new cable the car charger should all ready been pat tested so to speak all you are required to do is test your new supply
Still should have 2 pole rcd/ rcbo at d.b as most ev chargers rcds do not comply with the regs / code of practice and will still need to be tt or o-pen protection
UPDATE
Thanks for comments guys I have just done first fix and used easee chargers as were best for client control and monitoring
So I wired a sub main with new 8 way tp board and decided to TT board and got a ze of 6.19 ohm
Pricing up to install 2 22kw car chargers in a garage and possibly 2 more in the future for ev car rentals.
Must be lockable and record kw usage per car/RF card/pin and with an app for monitoring
Maximum demand of garage is between 10-20 amps per phase and have a 300amp tn-cs cut out but...
Few years ago when I was just a lurker I came across a post about filling in an electrical test sheet with brilliant description of the schedule of inspection with looking to see if any one can find post so I can get my apprentice to look
No unit has been very well looked after and sits in my old fluke box
Spoke to megger this week on phone and tech guy thinks it could be an internal relay sticking on
Na the unit is well looked after I a trusty fluke box and I'm very ---- about checking the unit I just seems to happen around 3/4 of doing a. Eicr or eic maby over heating but no symbol appears for that just locks 0.00 and constantly makes even with leads removed much prefer the fluke tbo a lot...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.