MILWAUKEE! I love the stuff if you can stretch to it. It just feels like quality, and the drill has that much power you have to be real carefully with it or it will throw you off you steps or smack you in the face!
I've tried all budget level models in most brands but finally bit the bullet and bought the top of the range milwaukee, and now have the grinders, SDS, radio, impact and drill with 7 batteries. Oh and the multitool!
Milwaukee M18FPD-502M Combi Drill 18v 5Ah - https://www.powertoolsuk.co.uk/milwaukee-m18fpd-502x-combi-drill.html?gclid=EAIaIQobChMI6t_OjebK1QIVhrftCh14GQG3EAQYAiABEgKJmfD_BwE
Milwaukee M18FPP2A-502X Power Tool Kit 18v 5Ah - https://www.powertoolsuk.co.uk/power-tools-dewalt-bosch-milwaukee-evolution-makita/cordless-power-tools-drill-drivers-combi-drills-impact-drivers-angle-grinders-impact-wrenches/cordless-power-tool-kits-18v-power-tool-kits-10-8v-power-tool-kits/milwaukee-m18fpp2a-502x-pow.html
I've tried all budget level models in most brands but finally bit the bullet and bought the top of the range milwaukee, and now have the grinders, SDS, radio, impact and drill with 7 batteries. Oh and the multitool!
Milwaukee M18FPD-502M Combi Drill 18v 5Ah - https://www.powertoolsuk.co.uk/milwaukee-m18fpd-502x-combi-drill.html?gclid=EAIaIQobChMI6t_OjebK1QIVhrftCh14GQG3EAQYAiABEgKJmfD_BwE
Milwaukee M18FPP2A-502X Power Tool Kit 18v 5Ah - https://www.powertoolsuk.co.uk/power-tools-dewalt-bosch-milwaukee-evolution-makita/cordless-power-tools-drill-drivers-combi-drills-impact-drivers-angle-grinders-impact-wrenches/cordless-power-tool-kits-18v-power-tool-kits-10-8v-power-tool-kits/milwaukee-m18fpp2a-502x-pow.html
Last edited:
When the drill comes it has a rather large handle which is about 500mm long that clips on, all I'm saying is I understand what it's for now, one black eye later!
I'm lucky if I run down 2 never mind the 7 I have, not all 5Ah though, just 4 of them! 2x 4Ah and one 3Ah for the radio.
Yeh iv heard really good things about the milwaukee stuff but it's out my price range for now
I have to admit, I had an erbauer drill and it was ok for the cost until I started to abuse it, putting in tek screws and using large holesaws and drill bits, as I was doing a lot of industrial work , think the gearbox was on its way out so took it back for a refund or credit i for I remember right.
You just have to accept its limits for what it is, don't fall for the sales crap though, they think giving it a German name makes people think quality and it must be made in Germany, its Chinese built but does seem better than most. It is aimed at the DIY market though and the name seems to work, it did with me at first!
You just have to accept its limits for what it is, don't fall for the sales crap though, they think giving it a German name makes people think quality and it must be made in Germany, its Chinese built but does seem better than most. It is aimed at the DIY market though and the name seems to work, it did with me at first!
Last edited:
- Dec 26, 2012
- 2,236
- 3,348
- 7,698
- If you're a qualified, trainee, or retired electrician - Which country is it that your work will be / is / was aimed at?
- United Kingdom
- What type of forum member are you?
- Practising Electrician (Qualified - Domestic or Commercial etc)
What I'd recommend doing before spending any money at the start - go out and get a feel of the tools you are thinking of buying. I found the Milwaukee Impact driver very cumbersome and bulky, others like it. It could be super performer but if you don't like the feel of it then move elsewhere.
If you like several, worth looking ahead - what price for bare units of likes of sds drill, grinder or other potential tools. And what price batteries. Erbauer with just Screwfix to supply those look a bit expensive. 2.0Ah is pretty lame these days, I throw those in the torch and the radio.
If you like several, worth looking ahead - what price for bare units of likes of sds drill, grinder or other potential tools. And what price batteries. Erbauer with just Screwfix to supply those look a bit expensive. 2.0Ah is pretty lame these days, I throw those in the torch and the radio.
This my sound a daft question but where can you get a good selection of drills/drivers out to try?
H
hightower
R
Rpa07
P
Phil Thompson
As 123 said, try before you buy, I did plenty of online reviews and it came down to Milwaukee or Dewalt, they were rated the best in almost every test going that I found, the Milwaukee combi drill was the only thing that outpowered the dewalt in 1 test, a 32mm auger through 9 inches on hardwood. I'd never do that so was of no benefit to me really.
I settled on the dewalt as I found the Milwaukee stuff very heavy, especially working overhead or using up ladders etc.
The combi drill I have is this one,
Couldn't fault it, I use it with the 6ah flexvolt batteries myself. And always use a dade debris collector when drilling above your head, stops the crap getting into the drill casing.
Good luck with whatever you go for.
I settled on the dewalt as I found the Milwaukee stuff very heavy, especially working overhead or using up ladders etc.
The combi drill I have is this one,
Couldn't fault it, I use it with the 6ah flexvolt batteries myself. And always use a dade debris collector when drilling above your head, stops the crap getting into the drill casing.
Good luck with whatever you go for.
D
davesparks
Stick with the ryobi tools that you have until they're dead, and in the mean time save the pennies to get better drills when that happens.
If they last another 6 months the you might find something better is available by then than what is currently on the market.
Personally I favour Makita for my cordless tools, but I can't say that they are any better or worse than the likes of dewalt and Milwaukee. I think a lot of what you hear will just be brand snobbery for no reason.
Have a look at a guy called AvE on YouTube, he does some good, no nonsense, reviews of tools and stuff.
If they last another 6 months the you might find something better is available by then than what is currently on the market.
Personally I favour Makita for my cordless tools, but I can't say that they are any better or worse than the likes of dewalt and Milwaukee. I think a lot of what you hear will just be brand snobbery for no reason.
Have a look at a guy called AvE on YouTube, he does some good, no nonsense, reviews of tools and stuff.
- Jun 10, 2012
- 2,827
- 1,525
- 2,688
- If you're a qualified, trainee, or retired electrician - Which country is it that your work will be / is / was aimed at?
- United Kingdom
- What type of forum member are you?
- Other
- If other, please explain
- Lapsed trainee ( was doing stage lighting 30yrs ago),
+ father of Trainee -who has recently jacked it in !
What is it with some of these brands ,
So trendy they look like Nike trainers ,
and make me feel dyslexic attempting to spell them
..the plug -- ERBAUER --
Some with lights -usefull ,at times .
(had enought problems with Citroen -- driven them)
Bosch - Germany the alternative to china .
(Booze consumed=1 tinny , I'm out of practice )
As always Bat size matters !
So trendy they look like Nike trainers ,
and make me feel dyslexic attempting to spell them
..the plug -- ERBAUER --
Some with lights -usefull ,at times .
(had enought problems with Citroen -- driven them)
Bosch - Germany the alternative to china .
(Booze consumed=1 tinny , I'm out of practice )
As always Bat size matters !
D
davesparks
Having a clutch doesn't stop it having the ability to break your wrist, otherwise it'd never manage to drill holes in tougher materials.
My ryobi drill is pretty much dead. The chuck is about ready to fall off and the batteries don't last half the time they use to. It's only really a diy drill that iv used a lot so it's done it's duty, especially as I purchased it second hand aswell!
That dewalt looks a real good option. It's my birthday in 4 weeks hence why I'm looking now. There's no point in waiting as I need a new drill and my birthday is coming up.
That dewalt looks a real good option. It's my birthday in 4 weeks hence why I'm looking now. There's no point in waiting as I need a new drill and my birthday is coming up.
- Sep 5, 2010
- 71,498
- 72,015
- 18,688
- 78
- If you're a qualified, trainee, or retired electrician - Which country is it that your work will be / is / was aimed at?
- United Kingdom
- What type of forum member are you?
- Electrical Engineer (Qualified)
- Business Name
- Telectrix
S
Squid
Comes with 2 x 3.0AH batteries, mate is thinking about getting the same one. I have the previous model, nice drill and I am moving over from Dewalt.
http://www.screwfix.com/p/makita-dhp459sfe-18v-3-0ah-li-ion-lxt-brushless-cordless-combi-drill/6407p
I like the look of the dewalt but that's only on first glance. It also slightly cheaper than the makita.
What is the range called on both? I'd assume they both have numerous other compatible items which can share batteries?
What is the range called on both? I'd assume they both have numerous other compatible items which can share batteries?
Similar threads
- Article
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
Advert
YOUR Unread Posts
-
-
DNO, EV installer, house fuse many cables and not a clue
- Latest: brianmoooore
-
-
-
-
-
-
-
