Thanks for all the comments -- really helpful.
I've swapped the LED over to another fitting in the house (1-way) and it switches on/off without any 'after glow'. So, it looks like it's the 2-way fitting that is the problem, not the bulb.
Does it mean the fitting is faulty and should be checked...
I've fitted a new bulb on our landing -- 60W LED GLS. It won't switch off, but just dims down a bit. Comes back to full brightness when switched on. (In other words, it's always 'on' even when the switch is 'off'.)
Have I used the wrong bulb type?
Is there a permanent trickle to this light...
The bearing is worn -- it's 21 years old. The dryer had started to make a screeching noise, so I'm replacing the drum shaft, and hope that will fix the problem. The tip of the shaft comes into contact with the earth strip, and had worn a perfect hole through it. At first I thought the strip was...
davesparks -- yes, the worn out one is very springy and looking at it again it's definitely a brassy colour. I don't want to take any risks, so guess I'll be buying the part I need.
The earth strip on our tumble dryer needs replacing as the drum spindle has worn through it. A replacement strip is around £10.
As the strip is a thin piece of copper, about 2in long and 1/4in wide, £10 seems way too much to shell out. I've made one from a copper pipe clip (cost 14p). Would it...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.