I have this motor from my egg rocker which the incubator was old and needed remaking, it’s a synchrononus 4watt motor that turns
my plan is to make it do a half turn every hour to keep eggs moving . This YouTube vid has this controller board I can’t find without china postage , I want a uk one...
I go rabbiting and I baught a ledlenser head torch for 150quid to find it has a cree xhp100 and I can get a xhp70 for 8 quid
my old torch cost 90 and has a creet6 which cost £2.30
so then check out the battery replacement to find its £7
from what I can see I need a driver they enclose in...
It’s only a 210 arc I weld at 90 to 150 amp max
not really for long times either i tinker as I need to make a tool etc
was told it’s a squeeze but that they wire it into a 13amp plug and socket still ?
I can’t plug that in me bloody wall or welder haha not sure what a 16amp is thaight max I...
I’m welding and have a cable blue 2.5mm 3 core 10metwrs to reach my shed
the plug and socket I got to wire on them biggest hardware has says 13amp but then says 1.0-1.5mm wire rated
online said I can stil do it but it’s a squeeze is that acceptable ?
I use 2.5 for it stops volt drops while...
What does that mean ?
it’s the same element as before with 2 wires.
can you elaborate on the earthing and how this one is earthed ? Or is it due to the low wattage it doesn’t need earth
it wil like the other be attached to a plastic incubator
There only 12v 2-5 watt can’t I hook them up to a mobile charger
they only have 2 wires how can fans etc only have 2 wires and no earth ?
Used to hook fans up to mobile chargers
Specification:
About this item
Rugged and durable - PTC heating element is environmentally friendly and durable...
Right so I guess they will earth normally through the circuit
so can’t be run independantly there is so many YouTubers hooking them up like leds and just powering them but I was wondering how there regulated bless that’s done within the u it’s itself I think I’m understanding
but earth is there...
I did say I have a thermostatic temp controller for blizzard tanks and incubator
But it requires I plug in a heating element that is uk plugged
So it is controlled it’s set to 37 but unless I put the pct heating element on a plug I can’t plug it into my thermostat
as you can see the numbers...
Heya I have a pct heating element for an egg incubator it’s 220v 80 w
atm it’s wired to the old circuit but mid incubation all the digi display started flickering and now I can’t read the numbers
I baught an external plug in thermostatic controller for lizards you plug a uk plug into and it...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.