Recent content by Prime Design

  1. Prime Design

    I Need Work Looking for site work in London/Watford for completion of NVQ L3 Portfolio

    Hi simonslimline. I hope you’re well and all set for the festive season. Thanks for your post, unfortunately it is neither helpful or informative. I start in a position on Monday. I’ll be doing containment on site, as you know this is exactly what I need in order to complete my portfolio. I know...
  2. Prime Design

    I Need Work Looking for site work in London/Watford for completion of NVQ L3 Portfolio

    Hi all, I have enrolled on to the NVQ level 3 course with the AM2 assessment and I'm eager to complete my portfolio in order to further my career. I've worked on various sites, worked for various reactive maintenance firms and now I work for myself. I've focused on been a self employed domestic...
    • Prime Design
    • Thread
    • completion electrical nvq electrical work electricians london london looking nvq portfolio site plan site work training work
    • Replies: 2
    • Forum: Electricians Jobs
  3. Prime Design

    2356-99 NVQ L3 Portfolio and Site Work

    Hi all, I have enrolled on to the NVQ level 3 course with the AM2 assessment and I'm eager to complete my portfolio in order to further my career. I started off working for free as I had a career change at the age of 26. I've worked on various sites, worked for various reactive maintenance...
  4. Prime Design

    Immersion problem

    I don't care what your problem is, I didn't ask what your problem is I asked about an immersion. If you don't want to help me then just leave me alone and don't make my business your business. I didn't invite you to this thread did I?
  5. Prime Design

    Immersion problem

    I will check the resistance of the elements again but I believe I got 0.20 ohms on both elements but I didn't zero the leads and I used the default range on my Megger. The thing is most of my training was done with fast paced maintenance firms who cared more about competing a high turnover of...
  6. Prime Design

    Immersion problem

    I'll continue to read all the negative posts, it motivates me to learn more. I will find a solution like I did with the underfloor heating and other threads you have read or highlighted. It will give me greater job satisfaction when it's fixed, safe, compliant and if need be, certified, knowing...
  7. Prime Design

    Immersion problem

    Not quite but carry on!
  8. Prime Design

    Immersion problem

    When doing continuity between live and earth and neutral and earth I'd expect 999 on my Megger. When doing continuity between live and neutral I'd expect a low value
  9. Prime Design

    Immersion problem

    Dave Sparks what is the purpose of this forum? I'm on here because I need help, not a lecture so don't talk to me about common sense! A zero reading would indicate a dead short when doing IR but I did continuity. E7 has a switch on the meter.
  10. Prime Design

    Immersion problem

    She doesn't plug them both in at the same time, I asked about fuses blowing and MCB's tripping but she says nothing blows or trips. The set up is odd because the bottom element is plugged into a timer which is plugged into the peak supply double socket
  11. Prime Design

    Immersion problem

    I didn't IR the elements I'd expect a zero value when doing continuity I would remove the pump from the immersion circuit so the immersion doesn't interfere with the pump under fault conditions and vice versa. I was never told what the reset button actually resets, I usually just press it...
  12. Prime Design

    Immersion problem

    The Cylinder looks around 15-20 years old. I haven't had direct contact with the landlord yet, only the tenant. I know it's incorrect but on arrival both top and bottom element were plugged into a double socket controlled by a double pole switch on a dedicated circuit for an immersion protected...
  13. Prime Design

    Immersion problem

    Hi lads, My client is having problems with her peak and off peak immersion. She claims she isn't getting enough hot water. I turned both thermostats up but she is still having the same problem. They are new elements but I tested them anyway and they are working fine. I'm wondering if the...
  14. Prime Design

    Underfloor heating

    Prime Design doesn't mean I know it all. Maybe I should change the name of my company to 'Don't Have A Clue Installations' and see how far I get. You still haven't said anything constructive so you might as well FLICK off!
  15. Prime Design

    Underfloor heating

    I have put it on a dedicated circuit. Warm up say their mats are about 200w per sq. metre so it will draw just under 14A hence the 16A breaker and it will be installed on a dual RCD CU

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

Tags

advice aus cable circuit course earth electric electrical electrician hello led light lighting lights looking new please question rcd socket supply switch testing training wiring
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock