Recent content by Sparkzilla

  1. S

    UK under cabinet lights question

    So picuture under cabinet lights, a 230 supply from a spur, to a LED tamlite driver, and 2 lights coming off of this... why is it that one of the lamps fails weekly and the other one has been going strong for over a year..
  2. S

    When connected to the fan voltage at connectors is 20v when disconnect from fan voltage is 220v. This down to the capacitor?

    Nice one, il take the fan but check all connections as they are accessible. Thanks
  3. S

    When connected to the fan voltage at connectors is 20v when disconnect from fan voltage is 220v. This down to the capacitor?

    I did think this however, i used my fluke mft and my normal martindale voltage tester, with proving unit. It was certainly live. 1578158479 So i was called to a fan not working, it was an inline fan. I could easily access it so I just tested if there was voltage. In the exsiting connections i...
  4. S

    When connected to the fan voltage at connectors is 20v when disconnect from fan voltage is 220v. This down to the capacitor?

    When connected to the fan voltage at connectors is 20v when disconnect from fan voltage is 220v. This down to the capacitor?
  5. S

    UK Advice needed for garage power job

    As in twin swinging in the air. I do indeed understand adding an RCD in series work. I was just asking if youd fit an rcd again in the garage 1578155382 Thanks mate, customer wants in buried, but everything else is spot on thanks mate 1578155448 Thanks mate
  6. S

    UK Advice needed for garage power job

    Take through the ceiling of the ground floor, drilled out and slung in free air to the garage, my plan is to take it back to the house come down in 25mm conduit, dig a trench terminate aromoured, to either a 2 way board or socket.
  7. S

    UK Advice needed for garage power job

    Your guess is as good as mine, customer said that he had said he was too busy.. i say the term electrician loosey, kitchen fitter with part p
  8. S

    UK Advice needed for garage power job

    Advice needed! Ive been to see a job for garage power, the previous electrician has taken a 4mm on a 32amp B MCB protected by a 30mA RCD. But hasnt done anything with, apart from the fact there is no protection and its T&E all straight forward. My ownly question is do i gland straight into a...
  9. S

    Does anyone have the accreditation of "SafeContractor"? I

    Thanks guys sounds like something I will wait to get, carry on building before this accreditation
  10. S

    Does anyone have the accreditation of "SafeContractor"? I

    Thanks for the response mate, i am at the cross roads, im a one man band but possibly looking at taking on larger projects, they say in the sales pitch that companies will search YOU out. Have you ever had any of that or just sales talk?
  11. S

    Does anyone have the accreditation of "SafeContractor"? I

    Does anyone have the accreditation of "SafeContractor"? If so do you get a good amount of work from it. If not do you use any other sites

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock