fluorescent alternatives

[sima24]

Hi, can anyone suggest a decent alternative for fluorescent lights? Customer has 3 in a garage and wants them replaced as he has an ilness thats effected by the flikering, anyone used an alternative with similar light output?
Thanks

 

[jeremy]

HF fluorescents should do the trick

 

[BigAndyB]

Anyone used the led replacement for tube lights?
Got a customer asking, I've only put in emergencies and flood lights so far. Different colour of light on the floods, colder. But emergencies with the defuser can't tell the difference.

 

[Birdo]

We use the led tubes in the hospital v good light but ur looking 45 pound a tube


Sent from my cave in the hills

 

[ayjay]

hf or light bulbs

 

[Brightspark2]

Yes LED tubes are good but quite expensive...

Sent from my Xperia S using next doors WIFI

 

[telectrix]

are these LED tubes a direct replacement for florries? i mean, can you just fit a LED tube in an existing 4', 5' , or 6' fitting?

 

[Gage]

We use the led tubes in the hospital v good light but ur looking 45 pound a tube


Sent from my cave in the hills

The price is well worth the savings in energy

- - - Updated - - -

are these LED tubes a direct replacement for florries? i mean, can you just fit a LED tube in an existing 4', 5' , or 6' fitting?

Some lengths are unavailable but i've seen 6 and 4s, direct replacement depending on the age of the fitting.

 

[Birdo]

are these LED tubes a direct replacement for florries? i mean, can you just fit a LED tube in an existing 4', 5' , or 6' fitting?

The ones we do you need to remove the ballast an run a neutral to one lamp holder and your sw to the opposite


Sent from my cave in the hills

 

[Jimsparky]

are these LED tubes a direct replacement for florries? i mean, can you just fit a LED tube in an existing 4', 5' , or 6' fitting?

The ones we do you need to remove the ballast an run a neutral to one lamp holder and your sw to the opposite


Sent from my cave in the hills

Yes and some have a live to one pin and a neutral to the other pin on the same end and nothing on the other end. We've used the Phillips ones they are good.