Discuss Private Jobs in the UK Electrical Forum area at ElectriciansForums.net

In the process of doing this myself, in theory any notifiable work needs to be signed off by building control or you must be a member of a Competent Persons scheme (NAPIT, elecsa, NIC etc). As far as I'm aware, as far as the Competent Person scheme states that the person certifying the work must be the person that did the job - but I know some scheme registered sparks that will sign 3rd party jobs off for about £150. Having the Part P qualification means nothing really unless you're a member of a scheme, it just demonstrates you know your way round the building regs.

It's not cheap or easy. I've gone with NAPIT as they seem to be less hassle than the others - they only need to see one job (NIC need to see 2 which can be difficult), that was £618 with the £40 fast track assesment included, about £80 for public liability (can go up to nearer £300 if you intend to do 3rd party inspection work like periodics etc as you will also need professional indemnity insurance), £60-£90 for meter calibration, about £100 for current 17th Edition regs books. They then need 2 references, copies of all qualifications, calibration certs, insurance certs, regs books, copies of Guidance Notes and a major works job to assess.

Worth doing if you think you'll have the volume of work to justify it, but if not it's a lot of money and hassle.

Good luck.
 
Another thing that annoys me while working through the company is when customers ask "have you got Part P". They've obviously read about it in the paper and heard it on the news and think this is all you need. When I say I've been doing it 18yrs now, fully timed served and hold this, this and that, they don't know what I'm on about.
I'd be a little concerned if someone was re wiring my house and the only qualification they did have was Part P.
I think everyone gets that to a certain degree -
"What qualifications have you got?"
"Well I've got 2330, 2382, 2391..."
"That's just numbers to me - what ACTUAL QUALIFICATIONS have you got?"
I suppose that's where it's handy to have a gold card. People seem to understand 'gold'.
 
I think everyone gets that to a certain degree -
"What qualifications have you got?"
"Well I've got 2330, 2382, 2391..."
"That's just numbers to me - what ACTUAL QUALIFICATIONS have you got?"
I suppose that's where it's handy to have a gold card. People seem to understand 'gold'.

Yeah, tell Mr & Mrs Average householder you have a gold card and I bet they'd look at you as queer as if you said you were 'Part P'. Jo Public just don't understand all these qualifications, half the readers of this forum don't either
 
Can't believe someone of your experience in the trade is asking.

Most others just get on with it.

Did have one call last week though asking if I could sign of the electrical work done 3 years ago at a house. Now selling the house and electrical certs and Part P certs were asked for.
 
Fortunately we don't have Part P here north of Hadrian's Wall. But you've been given good advice about PL insurance (and indemnity insurance if you are doing EICRs). You don't have to be a member of a scheme for your certs to be 100% acceptable, but here if you want to do work which is subject to Building Warrant, you either have to be a scheme member or pre-notify for the Council to arrange certification (the former is by far the best route financially if you are going to be doing just a few warrant jobs).

As has been said, HMRC are now much more proactive with small traders and cash in hand (and football clubs!), so in my view better to declare income and expenses than face a tax investigation.

Regards
It depends on your area I think, some councils need you to be a certifier of construction.
Some use the risk assessment method on the Scottish government website.
 
Glad to see this forum allows you discuss avoiding breaking the law in avoiding paying tax and not notifying in part p work. But use swear words like, **** **** **** and you get banned for it.

Oh sorry should I put s hit f uck and c unt
 
Last edited by a moderator:

Reply to Private Jobs in the UK Electrical Forum area at ElectriciansForums.net

Similar Threads

Looking for a bit of advice from the wider audience / those who may have done similar before. I entered the game a bit later / in a non...
Replies
12
Views
777
Hi guys. It would be really useful to run this past you and get a consensus/input from you for what would be a realistic amount to charge for an...
Replies
15
Views
2K
Evening all, Just a quick question, I am an electrical maintenance engineer and have 18th edition, inspection and testing and so on, so I get...
Replies
17
Views
1K
Hi, I am just wondering if there is anybody out there interested in allowing me to do a little voluntary work with your company to gain a little...
Replies
0
Views
197
Hi Everyone, My first post here, just a simple question. I currently get all of my work through word of mouth and contracts that I have...
Replies
14
Views
709

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock