Lutron

[Sly]

Hi Gentlemen,

I’m supposed to make a certificate for a big private property. In the house, there is main consumer unit with 40 circuit breakers. There are also another 3 Lutron units (32 breakers each) which are supplied from the main consumer unit via three B40A breakers. There is 96 C10A breakers (96 light circuits).
I’m not sure if I can write all circuits to one certificate (40 breakers in main unit + 96 breakers Lutron units) or I need to make certificates separately for each unit.
Thanks

 

[Mac]

Hi Gentlemen,

I’m supposed to make a certificate for a big private property. In the house, there is main consumer unit with 40 circuit breakers. There are also another 3 Lutron units (32 breakers each) which are supplied from the main consumer unit via three B40A breakers. There is 96 C10A breakers (96 light circuits).
I’m not sure if I can write all circuits to one certificate (40 breakers in main unit + 96 breakers Lutron units) or I need to make certificates separately for each unit.
Thanks

Where are you working mate,in a stately home.Take it the supply is 3 phase.Do they have their own power station

 

[Darkwood]

Whos house is it? the royal family.
Two options come to mind everytime you start a new dist' board start a new continuation sheet with the first been dist board 1 and all its outgoing submains, or a new report per board but you only end up repeating yourself.

 

[electricAl]

& remember to number your continuation sheets.

When you run out of numbers, start using Alphanumerics

 

[Sly]

It is Director of Barclays house and supply is 3 phase.
Thanks guys

 

[gaffer]

Did a job like that last year with 4 lutron boards,local inspector made me do a cct description for every cct on main dis board and every mcb on each lutron board.Took me two days of paperwork!,was not happy ,customer sold the house 3 months later and new owner had the place gutted!