Search the forum,

Discuss Which of the 2330 C&G Level 2 tests are hard? in the Electrician Courses : Electrical Quals area at ElectriciansForums.net

M

Mr Curnow

I have a multi choice test coming up on the 16th, it's slightly worrying because my teacher said that most of us will fail from judging our progress. I'm not sure if he is just saying that as he want's us to do some revision or he is being serious :(. I have revised all the nearly the whole booklet that our class were given. I know -

Ohm's law (R=V/I)
Power (P=VI)
Energy (J=WT)
Electrical quanity (Q=IT)
Transformers (Np/Ns= Vp/Vs = Is/Ip)
Resistivity (R= ρl/A)
RMS Value = 0.707 of peak
Average Value = 0.637 of peak
Average to RMS = 1.11
Flemings Left hand rule for motors
Magnetic flux = Weber
Magnetic flux density = Tesla = Weber/Area
 
lol the 201 is only health & Safety mate I wouldn't sweat on it too much it's actually a very easy exam if I remember correctly the hardest one for me was the 202 cause I was having a lot of days off from college. I think 201 has a little bit of basic Ohms law (V=IxR I=V/R R=V/I).
 
its all hard if you dont know, some dudes in our class failed them but they didnt really care untill came upto exams, now they have quit, have a passion for it cause it will feed ya the rest of your days (steak)
 
to anyone that is taking this course,

I have managed to pass all of the units with distinctions, put the work in, do the revision, do plenty of reading through the course litrature and most of all dont be afraid to ask about anything you are not sure of!!
 
with what you know as indicated above i really would not worry at all. go in nice and chilled out. as soon as the exam starts write doown the formulas you might forget on a piece of paper while your heads still in one piece :D then start on the exam 30 mins later you will be coming out thinking well that was easy :) good luck with it and don`t forget to post when you pass it
 
I have checked my book, on the 16th February I have 201 & 202 online and on the 7th June I have the 203 & 205 online.

Can you tell me what the exam is and how hard it is.
 
Last edited by a moderator:
good tip from phil, thats what i did, and it worked for me (on all exams).

the 2330 is not the hardest course in the world. from what i remember its mutiple choice, so even if you guess youve got a 25% chance of passing.
 
good tip from phil, thats what i did, and it worked for me (on all exams).

the 2330 is not the hardest course in the world. from what i remember its mutiple choice, so even if you guess youve got a 25% chance of passing.

Are you saying that I don't know enough or the test was hard for you when you done it?

By the way I can do about 30mins - 1hour a night on most days of the week, I think that's enough.
 
reading some of the stuff in the guidance notes and the regs helps get more of an understanding i think, you do need to put the effort in to have half a chance on the exams. got distinctions on the 201 and 205, been studying pretty hard for the course. got the 202 & 203 left so i downloaded the course handbook from the C&G website and it tells you all the listings of everything you need to understand for all of the outcomes of the exams. I've been basing my revising on this so that im studying the relevent info for the topics covered in the exams.
 
got my 202 tomoz. just been battering the formulas, got told that they only take up a little amount of exam. let use know how i get on tomoz

Ormie
 
Are you saying that I don't know enough or the test was hard for you when you done it?

By the way I can do about 30mins - 1hour a night on most days of the week, I think that's enough.

im in no position to comment about your knowledge and dedication mate. what i meant was that the 2330 shouldnt be beyond anybody of average intelligence, and if anybody does find it hard going then make up for that with more study, and most important of all, dont be afraid to ask for help.

Good luck mate

John
 
principles of electrotechnology 202

4 topics

01describe the application of the units used in electrotechnology
02 describe basic scientific concepts related to electrotechnology
02describe basic electrical circuitry and applications
04identify tools,plant,equipment and materials used for electrotechnical applications

think was 30 questions between these topics
 

Reply to Which of the 2330 C&G Level 2 tests are hard? in the Electrician Courses : Electrical Quals area at ElectriciansForums.net

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

Electrical Courses

This is the main Electrical Courses at ElectriciansForums.net. Find local recommended electricians courses. Avoid training "company" scams. Always go view the training centre before booking any electrical courses.
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock