Discuss Novice question in the UK Electrical Forum area at ElectriciansForums.net

Reaction score
0
Hello I'm a novice home owner. I have a porch with a currently unused 110 wire in a junction box in the roof of the porch. I would like to wire up a wall light switch and put up 2,3 or maybe 4 flood lights on the posts of the porch.
How do I do this? Put up metal conduit lines from the 110 line in the junction box to a switch mounted on the wall and then out to the floods? Can I put 3 or 4 floods and have each one tied to a 3 or 4 switch box?
 
assuming hot, neutral and ground in the JB, run to switch bank (4 switches) then individual wiring to each flood .use the switches to break just the hots. fit whatever containment is suitable for cable protection. recommend LED floodlights to keep the bills down and protectthe polar bears.
 
Hello I'm a novice home owner. I have a porch with a currently unused 110 wire in a junction box in the roof of the porch. I would like to wire up a wall light switch and put up 2,3 or maybe 4 flood lights on the posts of the porch.
How do I do this? Put up metal conduit lines from the 110 line in the junction box to a switch mounted on the wall and then out to the floods? Can I put 3 or 4 floods and have each one tied to a 3 or 4 switch box?
Yes you can add 3 or 4 flood lights. You can install PVC conduit or use outdoor approved cable and staple it on the roof of your porch
 

Reply to Novice question in the UK Electrical Forum area at ElectriciansForums.net

Similar Threads

Hi all, I just found this forum last night and figured I would post my issue since I can't find much out there with a similar situation. My job...
Replies
4
Views
384
I’m planning a 240V welder circuit in a detached garage with a 100A sub panel. For the 160A or 180A output welders I’m looking at, the conductor...
Replies
5
Views
894
I have pulled out an old evaporative system I purchased many years ago from storage to have a look at it and see if I can get it running. Was...
Replies
1
Views
184
I have been asked to change cu from old fuse board which has 6 fuses. Only 4 fuses are used. The first fuse feeds cooker circuit. This is not used...
Replies
17
Views
780
First, sorry if I'm not in the correxct thread. I'm trying to replace an old switch with a WIFI switch and cannot seem to do it right. There are...
Replies
1
Views
274

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

Electrical Forum

Welcome to the Electrical Forum at ElectriciansForums.net. The friendliest electrical forum online. General electrical questions and answers can be found in the electrical forum.
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock