Hi im new to the page. Someone i know has bought a big house and is thinking of changing it to flats. He asked me what it takes to change the mains to supply the flats? I said i would find out for him. Please help.
Hi All
Complete newbie here. I'm about to go to the correct section and ask everyones opinion on which training courses are available to me in my profession, but I'll give you a brief glimpse into what I'm looking for.
I'm 42 and for the past ten months have been working as a mechanical field...
Hi All,
My Customer want electric lights down the drive, approx. 60M. 6 lights in total.
Not a problem until I saw the lights, Pillar lights which have a transformer on them with a standard plug.
Usually I would put the transformer inside the light column, cut the plug off and hard wire but with...
Thanks for the welcome dan alright fellow troops couple of small things to ask. what's best to use for wiring outside lights other than conduit or sea was thinking fp but a friend told me it failed at a job he looked at, thoughts??
Hi I'm on screwfix looking for a harness for the IPAF 3a 3b course. I have £100 limit can some please recommend the correct one I should be purchasing for the course.
Thank you
Kev
PS the course is this Monday
Hi folks new to this but have a question . What are the circumstances that have to be met to fit a 240v fan in zone 1 . I have read that it's acceptable if the fan is ipx4 rated and is on a rcd. I've read that if the manufacturer states the fan is suitable for zone 1 and rcd protected then it is...
I looked at a job over weekend another spark left half done, there's 2 Collingwood LED bollard lights
at the entrance to a small office, one at each side of the pathway.
Cable feeding bollards is 1.5mm 3core swa ran ducting. The bollards come with a pre-wired 2 core
flex out the back of the...
A farmer client has a supply cable going underground from the DNO's kennel to a large barn converted to stables with power and light. The cable is fed from a 30 Amp switch fuse and a preceeding 30 mA RCD.
In the barn, I noted that though the power and light were on separate 2.5mm and 1.5 mm...
Piratepete
Thread
cable
concentric
earth
installation
single
single core
suitable
supply
volts
I have my NIC inspection on the 9th of March. Most of my work has been out of my area but I've had
a small site since November 15mins away which I had planned to take assessor to. Problem is the site has run quite a bit over due to roofing issues etc.
I will have two of the plots 2nd fixed...
A guy asked me to replace a domestic timeclock with a double socket. Is it OK to simply throw the new socket onto that circuit (seeing it is not being used any more and there is only one socket going to be used?
hi everyone
im currently looking at updating a board in a factory with bs88 fuses in it can anyone reccommend a board and overcurrent protective devices that would be a more suitable replacement?
the out going circuits are ok and up to date
thanks
Hello, I recently bought a 10w 12v 7" TV, but it doesn't come with its own battery. So would it be possible to connect it to a 12v 7,2ah ups battery without any tv damage?
Thanks for your availability
regards
Gents,
Is there a regulation on NOT been able to use singles in a pvc flexible conduit over a short distance i.e 1M. - and your thoughts please.
This example would be on a commercial installation.
Thanks
Not a lot to day so yet another question. Got several (about 10) 1.mm lighting cables to join together in a loft space which has about 300mm + loft insulation.
Years ago I would of used a J701 j/box with chocs blocks. Anything better on the market now? Would you guys fix the j/box above the...
Does anyone know where I can get a dusk sensor with a timer that I can terminate swa in?
Customer doesn't want one box on the wall let alone 2...:mad2:
Hello,
I wonder if someone can help me here.
My understanding is :
Leading edge dimmers are suitable for mains GU10 halogen lamps, but need to be down rated 75 to 50% to cover the load.
Leading edge dimmers are not suitable for GU5.3 / Mr16 low voltage lamps.
Trailing edge dimmers are...
Seems to be a lot of confusion, that FP cable is the be all, and end all of fire resistant cable. And is only suitable for fire alarms. So let me put some points across.
FP is often used for fire alarms, emergency lighting, PA systems, Disabled refuge, control switching, sprinkler control, UPS...
Hi gents,
i need to install a 4 pole 125a 220vdc changeover switch from a battery supply to ups supply to a loadbank and i am having trouble identifying a suitable switch for this purpose-#
could anyone advice of a suitable switch please.
Thanks
Hi, I need some help please to replace storm damaged Suntech STP245S panels on an existing installation. The array is connected to a Sunny Boy 5Kw inverter set up as 2 x 20 panels. There are about 6 panels smashed, but with Suntechs discontinued I need to find some suitable replacements.
I'd...
Hey guys, I need help finding out which tester you'd need to test for: continuity of circuit protective conductors, earth fault loop impedance and prospective fault current. I'm pretty sure you'd use a low reading ohmmeter for continuity but I don't know the other two. Also, any requirements...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.