Discuss One way of earthing the pipes..... in the UK Electrical Forum area at ElectriciansForums.net

In all fairness the inspector probably (but not certainly)exceeded the 5 weeks of some of his applicants.

This whole cps thing just gets worse,time as long since past that it should have been shelved
 
As far as why we now fit metal boards,I was told it was due to the old plastic boards melting and dripping down onto flammable items below the unit and setting them on fire.You DO NOT have to make the board airtight.When AM3 came out I started sealing the back of my boards with fire proof silicone.I was told expressly by my NIC guy that this was not needed.If anyone knows of another reason as to why we have to fit these boards then please let me know:cool:
 
You all seem to be dissing my tie wrapping the bonding wires but how would you take the wire across and support it? I can still see no practical reason why i cannot do it as i have done.Just because someones NIC bloke says you can't doesn't make it law.If any of the other posts of inspectors is to go by they seem to make it up as they go along.
 
No one is dissing you and I have no interest in what the NICEIC recommend or suggest but the fact is they are not suitably fixed. You could have taken a short section of tube from the right side if the board.
 

Reply to One way of earthing the pipes..... in the UK Electrical Forum area at ElectriciansForums.net

Similar Threads

Hi all, There's 2 single fan ovens in the house my mother recently moved into. Posh elecronic AEG units. It's been sat empty for a year, so the...
Replies
19
Views
1K
I'm in a questions asking mood tonight. I briefely looked at a job today and I need to recommend a board change but need to justify it. Firstly...
Replies
7
Views
1K
Disclaimer: I'm not going to attempt this job myself, I want a professional to do this job properly since I consider it non-trivial and need it...
Replies
2
Views
970
Background: I am not an electrician, I am a retired professional engineer high power broadcast transmitter design , but am dabbling outside my...
Replies
15
Views
2K
I try to keep out of Domestic work but I have a problem at home. Currently I have a wylex fuse board with re-wire fuses. they are great because...
Replies
55
Views
4K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock