Discuss A botch job innit Matey???? in the UK Electrical Forum area at ElectriciansForums.net
For flipps sake, don't let westwood see this vid, he'll have a choc box attack
As an aside, just how many down lights do you need; they might planes circling to try & land in that kitchen.
As another aside, I just wonder what was the point of the tests he did to find an intermittent fault. Don't think I'll subscribe.
Bit cynical aren't you MateyIt was in Hampstead, so a Sparks doing a job after 17:00 means its a either money job or the home owner is a hottie.
It was in Hampstead, so a Sparks doing a job after 17:00 means its a either money job or the home owner is a hottie.
I wonder if his boss knows, he's sat around drinking cups of coffee and filming himself. If he's his boss, he obviously charging shed loads, to be doing that.
And his down lights are crap
Didn't realise I had opened a can of wormsI wonder if his boss knows, he's sat around drinking cups of coffee and filming himself. If he's his boss, he obviously charging shed loads, to be doing that.
And his down lights are crap
You think he 's a bit of a prat then WestyHe wants to have a quick look at Reg 559.5.1 to realise that circular junction box is not a suitable luminare coupler nor does it incorporate cord restraint. Just noticed the sunglasses on his head what a ****.
He is one of these people that talk a good job but gives a poor one, as my old gaffer used to say to me "If bull**** was music you would be the king of jazz"You think he 's a bit of a prat then Westy
Too right, otherwise he'd be on his way home at 16:30Bit cynical aren't you Matey
He has actually replied to me and said he is going back and he will change the circular junction box.Just added a comment to him on YouTube
Personally, a great bit of PRI do wonder how he makes his money, spending most of his time filming himself. But I guess his prospective clients may watch his vids, and think what a wonderful chap he is, being a coffee drinker and all that
Beer and crisps at the ready .......Another reply from him he is going to try some Hager ones in the week and put up a review, can't wait.
There's coffee and there's coffee. It's like anything, when you've seen what goes into a quality product you can see where the money is.What is it with people and coffee these days biggest rip off going call it some trendy name and add a couple of ££££
I like him.
Yes but you're biasedThere's always one to buck the trend
"inner a lot would"??? wtfHe takes pride in his work clearly, although it's not always right. Everyone on here has used a junction box to connect up spotlights at some point! Atleast he didn't just re wrap his flex around the cores and re bend them over like inner a lot would!
never had any time for these over-priced fancy stupidly named coffees. coffee is cofffee
2 heaped spoons nescak origiginal ( or the lidl stuff, same but 1/3 the rice). 3 spoons white sugar, 1 fl/oz. scotch. cow juice optional.
I have to confess, in treating myself to one of those new fangled coffee machines, won't mention the price, but I had to re-mortgage the house.
I can make a flat white, cappuccino, café latte, Long Macchiato, Short Macchiato, white Americano and expresso. The only one I seem to get right, is the expresso. Think that's because you have to do something with the milk.
Water, Kettle, Nesscaff, Sugar, Milk mug and a spoon what more do you need? went up the local Wyevale to get err indoors some sort of house plant, 2 coffees and a bacon buttee £11 kin quid
Anyhows, it impress the pants off people. Especially trades people from the NIC
Is he doing a videoHe has actually replied to me and said he is going back and he will change the circular junction box.
If your swigging down your coffee like he does you must be ----ed by the end of the day!.never had any time for these over-priced fancy stupidly named coffees. coffee is cofffee
2 heaped spoons nescak origiginal ( or the lidl stuff, same but 1/3 the rice). 3 spoons white sugar, 1 fl/oz. scotch. cow juice optional.
Is he doing a video
If your swigging down your coffee like he does you must be ****ed by the end of the day!.
It is going to be called One Cock and a Junction Box.Is he doing a video
There's a sitcom in there somewhereIt is going to be called One Cock and a Junction Box.
He is probably a perfectly decent bloke but it irritates the --- off me when people post YouTube videos using inappropriate installation methods.I take it he's not grown on you over time then.
Quick question as have been out of the game for a while what would be the correct method/junction box for this job?He wants to have a quick look at Reg 559.5.1 to realise that circular junction box is not a suitable luminare coupler nor does it incorporate cord restraint. Just noticed the sunglasses on his head what a ****.
Reply to A botch job innit Matey???? in the UK Electrical Forum area at ElectriciansForums.net