Multifunctional Testers - Which one have you got and how long has it lasted?

[telectrix]

I've had a metrel eurotest for about 15 years now without a glitch.
Also got a megger 1720 and kewtech, we had a megger 1730 until one of the lads dropped it, megger wanted £ 250.00 just to look at it , from what I've heard it's their standard reply. It's still sat in the office waiting for me to make a decision.

send it to The Calibration Centre, Stafford. a lot cheaper than Megger. failing which, i'll give you a tenner for it.

 

[ferg]

Fluke 1652, never missed a beat and passes calibration every time.

 

[ashrow]

I've had a metrel eurotest for about 15 years now without a glitch.
Also got a megger 1720 and kewtech, we had a megger 1730 until one of the lads dropped it, megger wanted £ 250.00 just to look at it , from what I've heard it's their standard reply. It's still sat in the office waiting for me to make a decision.

There is a company in Kemspton Bedforshire that are really good on repairing test equipment, they repaired my fluke even though parts were no longer sold by fluke etc etc

 

[Admin]

I've had a metrel eurotest for about 15 years now without a glitch.
Also got a megger 1720 and kewtech, we had a megger 1730 until one of the lads dropped it, megger wanted £ 250.00 just to look at it , from what I've heard it's their standard reply. It's still sat in the office waiting for me to make a decision.

Can our sponsor not sort you out they're Megger approved. www.test-meter.co.uk @Test-Meter I'm sure if you tell them you're admin they will try sort you out.

 

[freddo]

I use a Kewtech KT65DL mostly, had it for about 5 years? And a KT63 had a bit longer. Before that had a set of 3 Robin testers for quite a few years, preferred to use those but had to retire them as the loop tester is no good with RCBOs.

 

[Wilko]

Kewtech KT65 for last 3 years. It’s been reliable and we understand each other. I do have Megger envy building, but the KT just won’t die .

 

[DaveyD]

Had the Fluke 1651 MFT (still have .. just in case)
using the 1652C now exclusively for the past eight years. Get calibrated each year and buy new test leads.
[automerge]1571091237[/automerge]

we understand each other

?

 

[Former Sponsor TM]

Just wondering which multifunctional testers you guys have, and how long have they lasted?

Cheeky plug: Multifunction Testers and Part P Test Equipment - https://www.test-meter.co.uk/multifunction-testers/

Hoping this becomes a handy thread for you all. There seems to be a massive price difference between them all. But then I guess some do things others don't? Not sure.

Let us know which multifunctional testers you have, which ones you wish you had, and how long the one you have has lasted so far.

Thanks for the plug Dan - if anyone does want any info, we're always happy to help people find the right tester and we do have a fair few MFTs in stock to choose from!

I've had a metrel eurotest for about 15 years now without a glitch.
Also got a megger 1720 and kewtech, we had a megger 1730 until one of the lads dropped it, megger wanted £ 250.00 just to look at it , from what I've heard it's their standard reply. It's still sat in the office waiting for me to make a decision.

Can our sponsor not sort you out they're Megger approved. www.test-meter.co.uk @Test-Meter I'm sure if you tell them you're admin they will try sort you out.

We're always happy to provide a competitive, no obligation quote for repairs.
Just drop us a message on [email protected] or call 0113 248 9966 - ideally with a fault description - and we'll see what we can do!

 

[Timbo]

Fluke 1654B. Never had any problems in 8 years. Last 2 years been calibrated at CEF calibration day for £20 + VAT.

 

[123]

I've a Fluke MFT, but find on earth loop tests it's too sensitive to noise so I use it as a backup. I should really get around to selling it but it's hard to part with tools and equipment and one day it will be required.

My go to is a set of Megger separates. They never seem to miss a beat.

 

[happysteve]

Kewtech KT65 for last 3 years. It’s been reliable and we understand each other. I do have Megger envy building, but the KT just won’t die .

Ha! Was in a very similar position until about a year ago, when I finally succumbed and got a Megger 1741. I still have fond memories of my KT63 (particularly when the Megger starts to weigh heavy round my neck!). The only thing I didn't like about the KT63 was it didn't remember the lead null reading after power-off... and if you didn't press a button for 3 minutes, it powered off. So, so irritating when you've got the wander lead out doing an R2 test, and it times out. I got used to impulsively pressing the test button every minute or so, a habit that took me several months to get out of with the Megger (which, of course, on a Megger, pressing the test button on continuity test removes the null reading!). I sold my KT63 on to a forum member.

 

[JK-Electrical]

Megger MFT 1730. Purchased in 2014.

 

[littlespark]

I've got an Ethos kit from CEF. Obtained when previous employment company stopped trading. Does the job.
Separate continuity/insulation tester and loop/RCD tester.
Have used it since new in 2008. Goes through AA batteries like me and Greggs sausage rolls.

Will only buy a new kit or MFT when this one dies completely

 

[FatAlan]

and a 1970's wind up megger that still gives consistent readings.

I suspect you were very good at winding up Tel?

 

[telectrix]

I suspect you were very good at winding up Tel?

careful mate. we still have slave ships going from Liverpool to Louisiana. free passage.

 

[Midwest]

we had a megger 1730 until one of the lads dropped it, megger wanted £ 250.00 just to look at it , from what I've heard it's their standard reply. It's still sat in the office waiting for me to make a decision.

Concur; Meggers standard charge is £280inc, or thats what I was charged. I did contact our forum sponsors, when my 1730 went wibble. But apparently if they can't fix it, it has to go back to Megger. I could not be without mine at the time for that extended period, so shipped it back to Megger. Does come back calibrated. Guess if you have other devices, thats not a consideration.

Perhaps Test Meter could comment on that.

 

[FatAlan]

careful mate. we still have slave ships going from Liverpool to Louisiana. free passage.

Sounds good Tel. I could do with a cruise. Short hop from Louisiana to the Carribean.

 

[telectrix]

you fancy a criuse? here's your ride.

 

[PEG]

My pal brought me one of them back,from his holiday....in Turkey...?

 

[Former Sponsor TM]

Concur; Meggers standard charge is £280inc, or thats what I was charged. I did contact our forum sponsors, when my 1730 went wibble. But apparently if they can't fix it, it has to go back to Megger. I could not be without mine at the time for that extended period, so shipped it back to Megger. Does come back calibrated. Guess if you have other devices, thats not a consideration.

Perhaps Test Meter could comment on that.

Hi Midwest, I've just asked our repairs manager about this; we can fix most MFT issues in our calibration lab so it's very, very rare we would send them to Megger. (It would be something like needing new costly PCBs for us to do that.) All our repairs do also come back calibrated.

We're always happy to investigate and provide a no obligation quote or advise of other options moving forward.