Multi switch/light Wiring

[Ryan Wright]

Hi, Could someone help me with confirming if this configuration is correct?

Secondly, I dismantled the upstairs double switch to fit a new 'smart' switch (bottom-right corner). How would i configure the cable to fit in the (L,N,L1,L2) of the new switch?

I have attached a screenshot of my configuration. Any help would be appreciated.

 

[westward10]

I suspect your light switches do not have a neutral present which your new switches may require.

 

[Octopus]

Not this again .........

 

[snowhead]

Not this again .........

Yeah.

There should be a warning on new Smart switches;
Will not fit where there was an old switch..(999 times out of 1000)

 

[Octopus]

^^ love to see the advert for this .....

And op, don't connect the blue thinking it's the neutral ....

 

[Leesparkykent]

The switch wire on the 2 gang switch for the upstairs light is connected wrong.

 

[MJPD29]

As above very doubtful it will work as you will most likely have no neutral

 

[westward10]

No idea why people need smart switches for such rudimentary circuits, you walk past the switch for heaven's sake.

 

[MJPD29]

No idea why people need smart switches for such rudimentary circuits, you walk past the switch for heaven's sake.

Probably takes longer to turn the light on with your phone or whatever before you enter the room. Totally pointless unless you want to light your house when no one is there

 

[westward10]

Probably takes longer to turn the light on with your phone or whatever before you enter the room. Totally pointless unless you want to light your house when no one is there

Precisely my point.

 

[westward10]

Wait for the new thread, my old two way switching no longer functions.