Underfloor heating

[Dan the spark]

Hi guys,
A bit of guidance required, am down to wire up a central heating system along with underfloor heating( ufh is made by John guest) plumber has left me with a heating wiring centre and also an 8 zone underfloor heating panel, looks like a f/a panel. question is.... Do I need the wiring centre or can I just do it all with the Underfloor heating panel?
Any info would be great. Have done a couple of central heating before but none with this underfloor heating

 

[GLENNSPARK]

you should need the salamander box for wireing the room stat and the pump to the panel....via the salamander box.......a double surface box with a blank front and a strip of 10 x 15A connector blocks should do it......

 

[yellowvanman]

Will also need to try and seperate the boiler calls from the UFH and H/W-heating controller in case of back feeding, I use contactors.

 

[Steviet]

Just the standard box. He should have left you with a bunch of activator heads Aswell. Then it's as simples as each room has its own stat cable which corresponds to each head ( or heads if more than one run per room). Just hope that it's all well marked up ...

 

[ezzzekiel]

no different to any 2 zone heating just wire as y plan in a wiring centre

 

[Dan the spark]

Cheers for the advice guys, think I confused myself by looking to far into it, all sorted. Many thanks