- Reaction score
- 479
Take your swa to the cu if possible, no point adding extra joints if not needed.
- Thread starter Daniel Pooley
- Start date
-
- Tags
- choice outbuilding power size swa
Discuss Power to outbuilding- Consequences of extraneous-conductive-parts on choice of SWA size in the DIY Electrical Advice area at ElectriciansForums.net
- Reaction score
- 7,231
Hello OP. I understand you want to do this yourself and I'm glad you think your cable route is ok.
When the electrician comes to wiring up the cable, if he's not happy with the route/installation I'm sure you will be happy take up the cable and do it to the regs.... if it's wrong...
Reply to Power to outbuilding- Consequences of extraneous-conductive-parts on choice of SWA size in the DIY Electrical Advice area at ElectriciansForums.net
Similar Threads
TNC-S main supply with 16mm swa supplying garage consumer unit from main consumer unit in house, then 4mm swa supplying pond equipment through...
Hi,
I have a Victron Multiplus-II 5kVA inverter/charger with Pylontech US5000 batteries installed in my house along with a 6.8kWp PV array and...
As the title says, I am looking for a recommendation for an enclosure and gland arrangement to electrically isolate or divorce the earth/armouring...
As an adult learner, I have lots of theory but not enough practical experience so I'm hoping I can get some help here (not abuse). I'm trying to...
I'm obviously still new and learning about what I can and cannot do, but essentially I want to install an EVSE at my own house for an electric...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.