C
chrissysmagicbo
hi just a word of help here i have a cooker point 30amp which is used for hard wiring a hob and also a oven which i will plug in via a 13amp socket.
what i would like to know is
1. can i add to this circuit
2. as the wiring is 6mm for cooker do i use a 2.5 for a double switch point, this will be used for kettle,mixer etc or do i keep to 6mm throughout
3 or should i leave the cooker circuit alone and try and take a spur off ring circuit ?
sorry if electrical grammer is not perfect, just need to be sure.
thanks for any help. reg
what i would like to know is
1. can i add to this circuit
2. as the wiring is 6mm for cooker do i use a 2.5 for a double switch point, this will be used for kettle,mixer etc or do i keep to 6mm throughout
3 or should i leave the cooker circuit alone and try and take a spur off ring circuit ?
sorry if electrical grammer is not perfect, just need to be sure.
thanks for any help. reg