- Reaction score
- 51
Hi don’t do that much fault finding and could do with some help, AM2 7 faults to find using on a continuity tester so can only be one of four things, but not really sure what readings to expect?
Short circuit = tester should show a few ohms but may have some resistance in leads and bleep
Open circuit = tester will show 0L and won’t bleep
High resistance = by high reading
Crossed polarity = cross over connections?
Anyone know a best way to do these as have a clue but not sure is it just the same as dead testing as you would normally
Short circuit = tester should show a few ohms but may have some resistance in leads and bleep
Open circuit = tester will show 0L and won’t bleep
High resistance = by high reading
Crossed polarity = cross over connections?
Anyone know a best way to do these as have a clue but not sure is it just the same as dead testing as you would normally