Newbie spark needs a bit of advice about tools from the vetrans please !

[Sharkster]

Alright chaps !

My name's Mark and after several years of typical dossing around in my youth, I did the 3 years of the 2330 and the 2391, still to do the 17th. Anyway I'm in the process of gathering up the tools I need for housebashing/mild industrial and I've cobbled together the below, which I've doubtlessly missed stuff off. Can anyone who's willing cast their eye over it please and see if there's anything I've missed ? Thanks for your help I really appreciate it

VDE screwdrivers, various heads
VDE pliers, sidecutters, log nose & needlenose
Crimpes & crimps
Wirestrippers
Studfinder
Megger MTK320 test kit
Multimeter
Selection of various sixe drillbits
Uplighter cutting blades
Lump hammer (fpr chopping out)
Clipping hammer
Braddle
Chisels
Hacksaw
Normal saw
18V drill to use as an screwdriver
36V drill
Safety notices and bonding clamp tags
Plumb bob
Chalk for marking out
Spirit levels
Conduit bender
Clampmeter
Proving unit & voltage tester
Fishwire for pulling through conduit
Stanley knife

 

[sparks1234]

Sandclips
Elbow grease
Skyhooks

 

[Spudnik]

Spoola, cable rods, box lug re threader...

errrrrrr... thats all i can think of at the mo.

 

[Bulmer]

Bush spanner, Water pump plyers (aka channel locks), stocks and dies, reamer, radio and flask.

 

[confused-fuse]

mars bar .. spoon for tea or soup on those cold days

mini label printer,heat shrink,gromit kit,flang kits, rubber gloves ..
notepad & lots of pencils ....

 

[High Tower]

Something to scrape the(NO SWEARING) plaster out of back boxes and plenty of crimps for repairing the cables that plumbers drill through.

 

[opm electrical]

Sandclips
Elbow grease
Skyhooks

you forgot the glass hammer, and a long stand too. lol

 

[jimmyjazz]

Head torch, bolster, spade bits, tape measure, sds drill & bits, floorboard saw, plasterboard saw, plastic conduit cutters.............you won't need everything day one, suss out each job & build your bag to suit. I know they're not tools but I rate Wagos & Wago boxes.

 

[confused-fuse]

wonderlead,floorboard lifter,croc clip jump leads,spare meter leads ya thay do go faulty,portable lighting for loft space i have a lidl one 29.99 just charge it up away you go gas soldering iron, walkie talkies,on-site guide & snag books ( scan pages in and keep in wallets books do go walkies on site ).. i do carry to much stuff when onsite or any other job i do.. even when i used to do tv,video servicing i take to much stuff ..
boxes of screws,wallplus,gromits,heatstrink black,brown,blue,green/yellow,gray.. plus lots of stuff i buy and never use..
hope some of this helps ...

 

[Notsosmart]

you forgot the glass hammer, and a long stand too. lol

You also forgot the box of milli-amps & the tartan paint

For light industrial also include: Tap wrench, Variuos size Taps, Hss drill bits (including 3.3, 4.2 & 5mm for 4, 5, & 6mm taps), socket set.