S
sdc8843
Hi there, can anyone please tell me test sequence for testing SELV ccts. Am studying for 2391 and my brains not working at the moment.
Cheers
Cheers
-
Please checkout the new poll we will be pushing hard, and want some good stories to come out of this
result are public - you can change your vote over time, which might genuinely be the case from time to time.
Discuss Testing SELV in the Periodic Inspection Reporting & Certification area at ElectriciansForums.net
OP
iceman
hi if your doin insulation resistence set meter to 250v dc expect a value of 0.5 ohms for an healthy circuit anythin below tht you got problems
if your testing electrical seperation test between the live conductors of the selv circuit connected together and the live conductors of any adjacent of higher voltage circuits connected together
if your testing electrical seperation test between the live conductors of the selv circuit connected together and the live conductors of any adjacent of higher voltage circuits connected together
Last edited by a moderator:
Reply to Testing SELV in the Periodic Inspection Reporting & Certification area at ElectriciansForums.net
Similar Threads
I have got these questions on 2391-52 inspection and testing but can't remember option of 1st two questions. Please any suggestion will be...
Hi All
Happy new year to all!
First post but long timer lurker, so thanks for all the previous help!
Just wanted to clarify something I have...
Hi
As some of you will know . I'm studying level 2.
I have the onsite guide. But does anyone know any books I can buy to help me understand...
I'm practising EICRs on friendly locations as I'm still in training - technically done my 2391-52 but frankly need loads more practise.
I've just...
Hi all, I am currently doing my 2391-52 testing course, can anyone recommend where I can find revision past paper or online revision sites for the...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
Uh oh...shorted MICC. How scr*wed am I?i measured the diameter of the conductors inside and they measured 1.7mm, which seems nearer...
- Latest: johnnyuk
-
Fuel Gauge needle moving with revs issueIsn't that for a battery model? There are 4 pins, and I only have 3 wires for the regulator.
- Latest: Tarlow
-
IEC 61439-1 - Relationship between prospective fault current and diameter of copper wireHi, I am currently reading through the standard IEC 61439-1 - Low-voltage swtichgear and...
- Latest: k1gabi
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.