other

  1. B

    UK One security light not coming on unless the other is

    Hello all, my first post here and I'm looking for some advice. We recently moved house and the external garage has a couple of security lights on it. One of them works the other didn't. As they were quite old and the screws seized I was having trouble replacing the bulb (and sourcing a bulb) so...
  2. O

    Does a replacement cable for a cluster pendant have to match the spec of the other pendant cables?

    Hi, I have a cluster pendant light with 6 cables hanging down and a small LED light at the bottom of each. I need to replace one or two of the cables to make them longer, does the cable have to match the spec of the others? i.e. if 0.5mm² has been used can I use 0.96mm² for the replacements or...
  3. Q

    Led ceiling Lights - one light Flickers when other is switched ON

    Hi, In my room 2 Led round ceiling lights are installed, week ago both were fine, but now when I turn on both lights, one starts flickering, even their emitting light is getting low... Is it switch problem or LEDs needs replacement?
  4. S

    Bog down on circuit but pick up on other

    I live in a duplex with an old Murray split bus panel. The issues I'm having atm are I have stove top but no digital oven controls. My dryer will just hum and dim lights. And my washer, fridge, microwave, and toaster will all bug down if I try to use them and dim the lights. But on another...
  5. J

    Anyone know of any manufactures of small recessed DB's or any other options?

    Hi all Have a job to replace 6 way recessed DB. Have looked extensively online but smallest can find is 10 way. Seems there's limited choice with these. Don't mind if have to chisel away abit to but need something preferably near the existing dimensions which are: Width 305, Height 180, Depth...
  6. Rockingit

    ‘Trendy’ to mount kit on strut for no other reason?

    Am I behind the times here? I’m being urged to mount a whole host of boards, iso’s, meters etc onto unistrut for no good reason (there’s perfectly good wall available and frankly it’ll look awful) because apparently it’s a current trend to do so?? Anyone come across this lately?
  7. B

    Noob looking for MFT and other bits of test equipment

    Hi. I'm looking to buy My First Multifunction Tester, a voltage indicator and a proving unit. Do you have any advice or links to special offers, bundles, etc? I'll be doing domestic EICRs, fault finding and remedial work (all domestic). TIA :) Edit: My budget is £800 all in
  8. P

    Hager split load board - 1 RCD tripping but not the other.

    Hi folks, My first post so hello! I’ve just put in a Hager 10 way split load CU at my in-laws and a new main isolator switch. They previously had an old rewireable fuse board, supply is via a 60A fuse and TT earth arrangement. No issues previously that I’m aware of. I didn’t get time to do any...
  9. baldelectrician

    Cancel income tax / VAT and other taxes and give people money- too good to be true?

    Saw this post from Business For Scotland (a pro indy business website) and I thought it was bonkers at first look. https://www.businessforscotland.com/its-time-for-annual-ground-floor-and-roof-rent/ Once I read through it I noticed that someone on £26,500 a year would be £17k better off than...
  10. J

    Would you guys say this is burnt?

    On the other side it is the power transformer. Trying to figure out why my lg 55lf6000 screen keeps blinking in 1.5 second intervals. So I’m wondering if that spot looks burnt and hoping it is the cause. It’s just I’m wondering if that spot is normal.
  11. Lister1987

    Pimp my Regs / OSG / Other

    Those that have sat them before will no doubt have done it, tutors and the like will no doubt recommend they do and serving sparks will no doubt to it. Highlighting, marking and improving the usability of your regs (and/or other publications - OSG for example will make taking an exam (or just...
  12. M

    DIY Help! Damaged Quick Connect 2 same color wires one side, Black & White the other

    A quick connect on the bottom of my farm tractor was snagged by a limb and one side of the connectors wires were pulled free from the housing. The good side with the wires still connected has a black wire (hot?) and a white wire (neutral?) but the 2 wires that were pulled free from the other end...
  13. G

    Need electrician advice - Replaced light switch successfully, but no power in other areas connected to same breaker panel switch

    Yesterday, I replaced a light switch (as I've done several times before). When I turned the breaker panel back on, the light was working - but now the other lights connected to that same breaker panel do not work. I re-checked all connections and reset the GFI (the outlet works) but no luck with...
  14. J

    Other electrician replaced RCBO with MCB

    Was called out to a car park where they had the lighting circuit tripping out. Fixed the issue by putting damaged cables in an IP rated box. However just realised that the electrician who came out before myself took out the RCBO and replaced it with an MCB in hope that it would stop tripping...
  15. E

    MK K7666sMET consumer units, Ansell downlights and other unneeded stock for sale

    8 MK metal dual RCD consumer units. All come fully loaded with 100A main switch, 2 x 63A RCDs, and 10 MCBs (1 x B40, 4 x B32, 2 x B16, 3 x B6). 1 is missing the busbar (I used it for a job) but I have an MK replacement. A couple of the cardboard boxes are not perfect but the CUs are untouched...
  16. J

    How does one HALF CUT solar module affect the other modules in the string when it is partially shaded?

    Hello everyone, I have a fairly technical question. I wonder what will happen to the efficiency of the PV system when we shade the bottom of one solar module (HCC) connected in series? Will the performance of the entire string decrease by half because only the top works in this module? Isn't it...
  17. S

    Does anyone have the accreditation of "SafeContractor"? I

    Does anyone have the accreditation of "SafeContractor"? If so do you get a good amount of work from it. If not do you use any other sites
  18. J

    UK I was wondering what other Sparks offer standing out from other local competitors? Be good to hear and share to better ourselves ?

    I h e been installing emergency lights with Fuseboards that’s are in cupboards, under stairs or just anywhere awkward, on the same lighting circuit as the floor the boards located. many years now on kitchens I’ve been installing all fused spurs into the back of one kitchen cupboard leaving...
  19. L

    Domestic installer and other works.

    Im a domestic installer for around 4 years now. Have a few contacts from schools that have small electrical jobs that need to be done Such as Replacing emgency light fittings installing new circuits. Emegency light testing, replacing ballasts. Changing broken light fittings. Am i legally...
  20. S

    rewiring existing ceiling fan with light on a 4way & 3way(separate?)

    existing fan w/light;2switches(3&4way);can i put fan one 1 switch and light on the other switch? So I want to be able to turn off the light and keep the fan going. I currently have to unscrew the light bulb in order to have the fan running without light. Can I have the light on one switch and...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock