advice needed please if anyone can help I have a three phase generator on site that is going to power up one of our machines, the cables that are on it are L1,L2,L3 and earth there is a space for neutral but it hasn't been used, inside the electrical panel there is no destinct neutral or earth bar, also there is a neutral inside the panel connected to the same place as the incoming earth, there is a 230v socket on the side of the panel which I'm guessing needs the neutral but wounded that mean that the earth would have current passing through it, any idea the correct way this should be wired.
Thanks any help would be appreciated.
Thanks any help would be appreciated.