Convert 6mm cooker connection point to 13a fuse spur for oven

[sid521]

Hi
So converting a 6mm cooker connection point into a 13a unswitched fuse spur with the load being a 2.5mm pre wired cable from a oven .

is this suitable?

thanks
sid

 

[DPG]

Hi
So converting a 6mm cooker connection point into a 13a unswitched fuse spur with the load being a 2.5mm pre wired cable from a oven .

is this suitable?

thanks
sid

Be better having switching for isolation.

 

[brianmoooore]

What's the rating of the oven? Not a fan of running things through a 13A cartridge fuse if there's likely to be a load of approaching the full 13A for any length of time.
Would be better to reduce the 32A protection device in the CU to 20A or 16A, and fit a DP switch* for local isolation.

*This can probably be the existing one