Aico 3000 Range
This official sponsor may provide discounts for members

Discuss Disconnection Time Requirements? in the Electrical Forum area at ElectriciansForums.net

Welcome to ElectriciansForums.net - The American Electrical Advice Forum
Head straight to the main forums to chat by click here:  American Electrical Advice Forum

Why do circuits 32 amps and under require a 0.4 second disconnection time at 230 volts, but circuits over 32 amps are legally allowed 5 seconds? 115 volts for 5 seconds is enough to cause injury to the human body.
 
  • Thread Starter Thread Starter
  • #3
You must be logged in to see the message.
 
  • Thread Starter Thread Starter
  • #6
You must be logged in to see the message.
 
  • Thread Starter Thread Starter
  • #9
You must be logged in to see the message.
 
  • Thread Starter Thread Starter
  • #12
You must be logged in to see the message.
 
  • Thread Starter Thread Starter
  • #15
You must be logged in to see the message.
 
You must be logged in to see the message.
 
  • Thread Starter Thread Starter
  • #21
You must be logged in to see the message.
 
  • Thread Starter Thread Starter
  • #23
You must be logged in to see the message.
 
Bulk Workwear - Clothing Suppliers for the Whole Forum Network
This official sponsor may provide discounts for members

Reply to Disconnection Time Requirements? in the Electrical Forum area at ElectriciansForums.net

uHeat Banner - Forum Discount Available
This official sponsor may provide discounts for members
Top Bottom