gas hob ignition

[Daveyboy]

Hi guys, if you have a job where customers has a new gas hob and electric oven. Can you put the ignition from the fused spur feeding the oven or an have an individual switch? Or would the socket supplying the ignition need seperate isolation? Thanks

 

[telectrix]

is the oven fed from a FCU or an isolator. ?

 

[Daveyboy]

will be from an isolator on a grid switch

 

[telectrix]

if the grid switch is supplied from a RFC ( as i assume it is ) then you could easily come off the supply side of the grid switches to a FCU for the ign.