Gland ??????????????

[Nick...]

anyone know of a compression gland that's compatible with flexi conduit and ip rated ??

 

[David Prosser]

Adaptaflex conduit fittings are available with IP54 and IP65 couples and glands.

 

[Nick...]

Adaptaflex conduit fittings are available with IP54 and IP65 couples and glands.

Cheers Dave, had a look but couldn't find what I'm after.

its for a garden spike light with flex which will be going in to flexi conduit, so to fit conduit one end and compression fit flex other.

 

[Nick...]

Cheers Dave, had a look but couldn't find what I'm after.

its for a garden spike light with flex which will be going in to flexi conduit, so to fit conduit one end and compression fit flex other.

 

[brianmoooore]

If that white flex conduit in the pic is what you intend to use, it won't last long outside in the sun.

 

[Nick...]

just some bits of the van for an example pal

 

[SparkyChick]

The only way I can think of achieving that would be to a glavanised coupler or two of these glued back to back.

https://www.NoLinkingToThis/p/tower-female-conduit-adaptors-20mm-black-2-pack/77225

 

[Nick...]

The only way I can think of achieving that would be to a glavanised coupler or two of these glued back to back.

https://www.NoLinkingToThis/p/tower-female-conduit-adaptors-20mm-black-2-pack/77225

thanks for the input, i could use a coupler and some PTFE tape if i cant find a gland, would prefer a gland though

 

[SparkyChick]

I had a quick look on RS to see if there was anything more suitable... I only looked at the Adaptaflex range and they didn't have anything that would make the job easier. It's a bit strange as I highly doubt your the first person to want something like this.

 

[Nick...]

I had a quick look on RS to see if there was anything more suitable... I only looked at the Adaptaflex range and they didn't have anything that would make the job easier. It's a bit strange as I highly doubt your the first person to want something like this.

thats what i thought!

 

[Avo Mk8]

The right fitting but unfortunately for the wrong conduit? ("Female conduit adapter")

https://heyco-products.com/media/pdf/de/39/a3/Heyco-Flex-I-Adapters.pdf

 

[Nick...]

The right fitting but unfortunately for the wrong conduit? ("Female conduit adapter")

https://heyco-products.com/media/pdf/de/39/a3/Heyco-Flex-I-Adapters.pdf

yes mate, thought it would be an off the shelf sort of thing ?

 

[pirate]

I've used these for flexicon, a dab of silicone, never had any problems:

https://www.NoLinkingToThis/p/tower-male-corrugated-conduit-adaptors-20mm-black-5-pack/51169

 

[pirate]

and for the other end:

https://www.NoLinkingToThis/p/tower-nylon-male-comp-gland-20mm-2-pack/80851

 

[Lister1987]

from Wiska 2022 catalogue

 

[suffolkspark]

Cant you just push the flexi conduit into a female adaptor and use plenty of solvent conduit glue? Thats how i do my rods when i go in the side of a pit, if not it will fit in a 32mm compression gland

 

[Nick...]

Yes mate that looks like the one

 

[Nick...]

Cant you just push the flexi conduit into a female adaptor and use plenty of solvent conduit glue? Thats how i do my rods when i go in the side of a pit, if not it will fit in a 32mm compression gland

I did use a lot of silicone in the end, just nice to have the correct fittings mate

 

[Markyd]

I know its a bit late but would these be any good

FPPFLK-CP20G 20mm IP66 Polyprop Gland and Locknut Grey (Pack of 10)

20mm Polyprop gland and locknut

www.cef.co.uk