-
Please checkout the new poll we will be pushing hard, and want some good stories to come out of this
result are public - you can change your vote over time, which might genuinely be the case from time to time.
Discuss high readings (maybe) in the Periodic Inspection Reporting & Certification area at ElectriciansForums.net
Reply to high readings (maybe) in the Periodic Inspection Reporting & Certification area at ElectriciansForums.net
Similar Threads
Hi, while carrying out an EICR at a farm cottage on Friday i came up against a problem early on. Whilst measuring the Ze the reading i obtained...
On an EICR I found a 200 amp 3ph supply, TNS earthing (which looks original) and Ze of 19 ohms. No rods. No RCDs.
L1 -> N was about 0.5 ohms...
Hi
Can anyone clear up or explain in a bit more detail what could potentially be causing the results I have. I have just tested a 32a ring main...
I have been asked to provide a quote for a supply to an toilet block on a campsite.
The three phase supply to the campsite is approx. 150m from...
Hi Guys, just looking for a bit of advise. I am booked up to go on 2391-52 soon, and was looking at using my own tester, Megger1552. It is all...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
Good Morning Thread - Come say good morning, tell us what you've got on today. :)Followed by two 'how the episodes were made' on BBC 3, for those who aren't interested in the...
- Latest: brianmoooore
-
Fuel Gauge needle moving with revs issueYes, the fuel gauge is fed by AC, and the diode keeps the current going one way. There is a low...
- Latest: Tarlow
-
Does a SPD need a dedicated MCB?What is your earthing system? What type of RCD will you use? Don't forget DNO notification.- Latest: westward10
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.