Is 4mm heat resistant cable okay for 7.5kw range cooker?

[MDJ]

as mentioned previously, you need to allow for diversity, you will not pull enough load to worry the 4mm2 cable you have

 

[James]

o ffs... did you deliberately leave those two tabs showing? You dirty old man

No, I opened up a new window just to wind you up!
Back to normality again!

 

[chris140]

cooker should not pull more than 32A
cable if it is H07RN-F as below is good for 35A
however as said before, it will not draw 32A in use for long, even if you have everything turned on.
Nothing to worry about.
View attachment 116029

Thanks for your reply

 

[chris140]

as mentioned previously, you need to allow for diversity, you will not pull enough load to worry the 4mm2 cable you have

Thanks for replying