K
kane1990
Gents
I have an issue with my lighting circuit upstairs. Truthfully I have caused it myself but I am hoping some of you guys will have an answer.
1) refurbing bathroom, removed walls and removed light switch and ceiling rose from both the separate bathroom and toilet room.
2) all upstairs bedroom lights were working when a rogue cable (labelled in diagram) was connected up with the remainding twin cable and 2 single reds.
3) Disconnected the rogue loose cable and lost all upstairs lighting.
4) connected it up as shown in diagram and bedroom 1 and 2 lights work, bedroom 3 does not. Havent got as far as putting in bathroom ceiling rose yet.
Any advice and direction would be appreciated.
Diagram attached
Cheers
Kane