I was wondering if someone could assist me in determining whether I can replace my current 3-way switch configuration with an Enbrighten smart switch setup. I have provided photos of everything relevant.
The first switch box, which has only one 14-3 cable entering it, is depicted in an attached photo.
The second switch box, which is slightly more complex, is shown in another photo and a supplementary drawing. This box has four cables entering it. Two of these cables are old cloth-shielded wires that are merely connected to each other and, as far as I can tell, unrelated to this setup. I have also included a diagram illustrating how the other two cables in this box are connected.
A photo of the light fixture is provided as well. It has a black and a white wire connected to each other with a wire nut, in addition to a black and white wire running to the fixture itself.
Finally, I have attached a photo of the smart switch manual page for reference.
Many thanks!
The first switch box, which has only one 14-3 cable entering it, is depicted in an attached photo.
The second switch box, which is slightly more complex, is shown in another photo and a supplementary drawing. This box has four cables entering it. Two of these cables are old cloth-shielded wires that are merely connected to each other and, as far as I can tell, unrelated to this setup. I have also included a diagram illustrating how the other two cables in this box are connected.
A photo of the light fixture is provided as well. It has a black and a white wire connected to each other with a wire nut, in addition to a black and white wire running to the fixture itself.
Finally, I have attached a photo of the smart switch manual page for reference.
Many thanks!